683161
56
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Preset
The tuning results can be stored as preset information in the built-
in antenna tuner according to the preset frequency categories.
When the built-in antenna tuner is ON, the preset information that
corresponds to the current TX frequency is automatically
configured for the built-in antenna tuner.
Press [AT].
<< >> appears on the screen. When the antenna
tuner is ON while receiving, <<
>> is displayed. The
preset information that corresponds to the current TX
frequency is configured for the built-in antenna tuner.
When the TX frequency is altered, the preset information that
corresponds to the preset frequency category is
automatically configured for the built-in antenna tuner.
To turn off the built-in antenna tuner, press [AT] again.
Preset Frequency Categories for Built-in Antenna Tuner (MHz)
0.030 f < 1.850 14.100 f < 14.500
1.850 f < 2.500 14.500 f < 18.500
2.500 f < 3.525 18.500 f < 21.150
3.525 f < 3.575 21.150 f < 21.500
3.575 f < 3.725 21.500 f < 25.500
3.725 f < 4.100 25.500 f < 28.300
4.100 f < 6.900 28.300 f < 29.000
6.900 f < 7.050 29.000 f < 30.000
7.050 f < 7.100 30.000 f < 51.000
7.100 f < 7.500 51.000 f < 52.000
7.500 f < 10.500 52.000 f < 53.000
10.500 f < 14.100 53.000 f < 60.000
60.000 f < 74.800 (E type)
Holding Transmission at the End of Antenna Tuning
Transmission can be held after antenna tuning has ended.
Configure in Advanced Menu [7]
TX Hold After
Antenna Tuning
Setting Value Off (default)/ On
Off: Returns to receiving state after antenna tuning has ended.
On: Continues 10 [W] transmission in the CW mode after
antenna tuning has ended.
When transmission is held after antenna tuning has
ended, the held status will be canceled when
transmission operations such as [SEND] or PF [DATA
SEND] is performed or when [AT] is pressed.
Switching Antenna Tuner Behavior during Reception
Signals received may be made to pass through the built-in antenna
tuner. Turning ON this function may help to reduce reception
interference from other distant frequencies.
Configure in Advanced Menu [8] Antenna Tuner
during RX
Setting Value Off (default)/ On
Off: Signals received do not pass through the built-in antenna
tuner.
On: Signals received pass through the built-in antenna tuner.
When full break-in is ON in the CW mode, the antenna
tuner will function during reception regardless of the
above setting.
If the TX and RX frequencies are different during split
operation, the antenna tuner will not function during
reception regardless of the above setting.
Configuring the Built-in Antenna Tuner Behavior for
Each Band
Two options to either store the ON/OFF status of the built-in
antenna tuner separately for each band category or to store the
same status for all bands are available.
Configure in Advanced Menu [9]
Antenna Tuner
Operation per Band
Setting Value Off (default)/ On
Off: Stores the same ON/OFF status of the built-in antenna
tuner for all bands.
On: Stores the ON/OFF status of the built-in antenna tuner for
each band category.
Connecting the External Antenna Tuner AT-300
To use the external antenna tuner AT-300, connect it to the ANT
1 connector and AT connector.
AT-300 will not function if it is connected to the ANT 2 connector.
AT connector is a control terminal that is used exclusively for
AT-300. It cannot be used to control other external antenna
tuners. When an external antenna tuner other than AT-300 is
connected, make use of TX tuning.
AT-300 cannot be used with the 50/70 MHz band. When
using a 50/70 MHz band antenna, connect it to the ANT
2 connector.
When AT-300 is connected to the AT connector and ANT
1 is used, the signal bypasses the built-in antenna tuner
circuit.
Production of the AT-300 has been discontinued.
.
AT-300
ANT 1
Connector
TS-890S
4 BASIC OPERATIONS
4-12
56

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info