683161
54
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
FM Mode S-meter Sensitivity
The default deflection type in the FM mode is the same as that in
the other modes. Selecting “High” switches the transceiver to the
same deflection type (high sensitivity) as our conventional models.
Configure in Menu [0-07] FM Mode S-Meter
Sensitivity
Setting Value Normal (default)/ High
This function is available when Menu [0-11] S-Meter
Scale is configured to “Type 1”.
Analog Meter Response
Configure the response speed of the analog meter indicator.
Configure in Menu [0-08] Meter Response Speed
(Analog)
Setting Value 1 to 3 (default) to 4 (1 step)
Meter with Peak Hold
Display the peak hold of the digital meter.
Configure in Menu [0-10] Meter Display Peak Hold
Setting Value Off/ On (default)
S Meter Scale
Switch the type of deflection for the S meter.
Configure in Menu [0-11]
S-Meter Scale
Setting Value Type 1 (default)/ Type 2
Type 1: Same scale as our HF products.
Type 2: Initial deflection is more sensitive compared to Type 1.
Additional notes for “Type 2”
The S meter indicator will appear deflected at all times
when there is external noise.
The movement may not be smooth as it is a pseudo
representation of the S meter deflection.
Narrowing the RF gain may disrupt the continuity from
S0 to S4.
TX Meter (Digital)
In addition to the analog meter display, a two-tiered digital meter
can also be displayed at the same time.
.
Configure in Menu [0-12] TX Digital Meter
Setting Value Off (default)/ On
The TX meter (digital) only appears in the analog meter
display mode.
The TX meter (digital) is displayed in a two-tiered bar format.
ALC is shown at the upper level, while the display at the lower
level varies according to the setting of the F [METER] digital
meter.
During transmission, the analog meter always displays the
TX output power.
Switching the Antenna
Switch the antenna that is connected to the antenna connector.
The ANT 1/2, RX ANT and DRV settings are automatically stored
in the antenna band memory. When the same band is selected
subsequently, the same antenna will be selected automatically.
Press and hold F [ANT/PRE].
Pressing and holding F [ANT/PRE] switches the option
between “ANT 1” and “ANT 2”.
When “ANT 1” is selected, <<
>> is displayed. When
“ANT 2” is selected, <<
>> is displayed.
Selectable Antenna Frequency Range (MHz)
0.03 to 0.522 10.5 to 14.5
0.522 to 2.5 14.5 to 18.5
2.5 to 4.1 18.5 to 21.5
4.1 to 6.9 21.5 to 25.5
6.9 to 7.5 25.5 to 30.0
7.5 to 10.5 30.0 to 60.0
60.0 to 74.8 (E type)
RX Antenna
Select an RX antenna.
To use an RX antenna such as an HF low-band Beverage antenna
or a directional loop antenna, connect it to the RX IN terminal on
the rear panel. The input impedance is 50 Ω. A self-made or
commercially available BPF or trap filter can also be inserted
between the RX IN and RX OUT terminals.
Press [RX ANT].
Pressing [RX ANT] each time enables or disables the RX
antenna of the selected band.
When the RX antenna is enabled, << >> is displayed on the
screen.
4 BASIC OPERATIONS
4-10
54

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info