683161
58
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Configuring the Band Direct Key during Split
Operation
Three options are available for selection with regard to the
behavior when the band direct key is pressed during split
operation.
Configure in Menu [3-13] Band Direct Keys in Split
Mode
Setting Value
RX Band (default)/ RX Band and Cancel Split
Mode/ RX/ TX Band
RX Band: Changes the receiving band.
RX Band and Cancel Split Mode: Changes the receiving
band and cancels the split mode.
RX/TX Band:
Changes both the receiving and transmitting bands at the
same time.
The transmitting band and receiving band is assigned with
the same memory number.
Each band can be adjusted while maintaining the split status.
TF-SET (Setting the TX Frequency)
TF-SET is a function for temporarily switching the TX frequency
and RX frequency. Signals can be received at one’s own
frequency while the TF-SET switch is pressed and held down, and
the TX frequency can also be changed in this state. Doing so
allows checking of whether there is interference in the newly-
selected TX frequency.
A call is made to the target station when there is no interference
and at the right timing to ensure smooth communication with DX
stations that are receiving calls from a large number of stations.
In other words, the communication status of the DX station in
the presence of interfering signals are taken into consideration
and transmission is carried out using the TF-SET function at the
instant when the DX station is in the receiving state and there is
no transmission from other stations. Putting this function to
good use enables communication with a larger number of DX
stations.
1 Configure the split operation frequency.
2 Press and hold [TF-SET].
The TX frequency and RX frequency are switched.
3 Turn the Tuning control while pressing and holding
[TF-SET], or press [UP]/[DWN] on the microphone.
Signals are received at the new TX frequency.
4 Release [TF-SET].
Reception starts at the original RX frequency.
Adjustment of the split frequency using the [RIT/XIT]
control is disabled during TF-SET.
Turning on the frequency lock before using the TF-SET
function helps to prevent the transceiver from losing
communication with the DX station due to erroneous
operation.
AGC
AGC (Automatic Gain Control) is a function for controlling the IF
gain automatically so as to minimize fluctuations in the strength of
the signal that is being received.
The AGC time constant is configured to FAST, MID or SLOW
according to the receiving status and operation mode (other
than FM mode).
The digital AGC circuit of this transceiver divides the time
constant into 20 levels from SLOW to FAST, with “1” being the
fastest and “20” the slowest.
Generally, the time constant is configured to a fast time constant
in the CW and FSK modes where fluctuations in the signal
strength are well defined, and a slow time constant is used in
the SSB and AM modes where changes are gradual.
However, a fast time constant is also useful in the SSB and AM
modes to perform tuning quickly or when receiving weak
signals.
AGC can also be turned off.
A different default time constant for AGC is configured for each
mode as shown below.
Default AGC Time Constant Setting
Mode Setting Display
SSB SLOW
AGC-S
SSB-DATA SLOW
CW FAST
AGC-FFSK FAST
PSK FAST
AM SLOW
AGC-S
AM-DATA SLOW
5 COMMUNICATING AIDS
5-2
58

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info