683161
53
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
TX Output Power Limiter
The TX output power limiter can be used to limit the TX output
power. This is a function to prevent the TX output power level from
exceeding the preconfigured level for each band when the
[POWER] control is turned. It can also be used to limit TX output
power only in the DATA mode with a specific band.
Turning ON/OFF TX Output Power Limiter
Press F [MAX-Po].
Pressing F [MAX-Po] each time toggles the TX output power
limiter function between ON and OFF.
When the TX output power limiter is turned ON, pressing F
[MAX-Po] displays the confirmation screen for turning off the
TX output power limiter.
Pressing [F4](OK) turns off the TX output power limiter
function. Pressing [F7](CANCEL) or [ESC] cancels the
operation.
.
Configuring the TX Output Power Limiter
1 Press and hold F [MAX-Po] to display the TX output
power limiter screen.
.
2
Press F4 [ ]/ F5 [ ] to select a frequency band.
3
Press F2 [ ]/ F3 [ ] to select the TX output
power to limit.
Select the TX output power item to limit as follows.
Max Power Limit: For configuring the TX output power limit
during transmission.
The TX output power limit can be configured separately for
the SSB, CW, FSK/PSK, FM/AM and DATA modes.
TX Tune Power: For configuring the TX output power limit
during TX tuning.
4 Press F6 [–] / F7 [+] or turn the [MULTI/CH] control
to select a limit value for TX output power.
To restore the default setting, press and hold F1
[(RESET)].
5 Press and hold F [MAX-Po] or press [ESC] to end
the process.
A different TX output power limit cannot be configured
for the antenna connectors (antenna 1/2).
If Advanced Menu [6] TX Power Down with Transverter
Enabled is configured to “On”, the F [MAX-Po] and watt
display at the right edge of the screen will disappear
when the transverter or drive output is turned ON.
Meter
The meter displays the measured reading of the S meter during
reception and that of the selected meter during transmission.
Changing the Meter Type
A digital meter and two types of analog meters are available for
selection.
Changing the Meter Type from the Menu
Configure in Menu [0-09] Meter Display Pattern
Setting Value Digital/ Analog (White) (default)/ Analog (Black)
Changing the Meter Type via Touchscreen Operation
Touch the meter display area while an analog or
digital meter is displayed
Touching the screen each time switches the meter in the
following sequence: “Digital” → “Analog (White)” → “Analog
(Black)”.
When in the compressed mode, touching the meter will not
change the display.
.
Analog MeterDigital Meter
Switching between TX Meters
Press F [METER].
Press F [METER] each time switches the display as follows
according to the meter type.
Analog meter display when the TX meter (digital) is OFF:
“Po” → “SWR” → “Id” → “COMP”* → “ALC” → “Vd” →…
Display at the bottom of the TX meter (digital) when the
TX meter (digital) is ON:
“SWR” → “Id” → “COMP”* → “Vd” → “TEMP” →…
The last line of the display in the digital meter display
mode:
“SWR” → “Id” → “COMP”* → “Vd” → “TEMP” →…
When a mini digital meter is displayed:
“Po” “SWR” “Id” “COMP”* “ALC” “Vd” “TEMP” →…
Po
Indicates the TX output power. (Output power at the
peak)
SWR
Indicates the standing wave ratio which reflects the
matching status of the antenna.
COMP
Indicates the amount of TX audio amplitude that is
compressed by the speech processor.
ALC Indicates the ALC level.
ld Indicates the drain current of the final FET.
Vd Indicates the voltage of the final FET.
TEMP Indicates the temperature of the internal circuit.
An external meter can also be used to display the signal
level by connecting an analog meter to the METER
terminal on the rear panel.
*: COMP meter can only be selected when the speech
processor is ON.
BASIC OPERATIONS 4
4-9
53

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info