697462
10
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
10
Shutdown / switching off
CS200 – 6720830475 (2015/06)
Table 6 Settings in the Commissioning menu
5.4 Additional settings at commissioning
Some settings are only available if the system is designed and
configured accordingly. For more details refer to the MS 100/
MS 200 technical documentation.
Check the settings in the service menu ( Chapter 7,
page 10 and installation instructions MS 100/MS 200).
5.5 Performing function tests
The function tests can be accessed via the diagnosis menu. The
available menu items are strongly dependent on the system
installed. Under this menu the following can be tested, for
example: Solar pump: On/Off ( Chapter 7.2.1, page 12).
5.6 Check monitored values
The monitored values can be accessed via the Diagnosis menu
( Chapter 7.2.2, page 12).
5.7 System handover
Enter the contact details of the responsible installer in the
Diagnosis menu > Maintenance > Contact address, e.g.
company name, phone number and address or e-mail
address ( Chapter 7.2.5, page 12).
Explain to the customer how the solar controller and the
accessories work and how to operate them in accordance
with best practice.
Inform the customer about the selected settings.
We recommend to hand over these installation instructions to
the end user.
6 Shutdown / switching off
The solar controller is powered via the BUS interface and is
always switched on. The system should only be switched off for
maintenance work, for example.
Disconnect power from the entire system and all BUS
nodes.
After a prolonged power failure or extended period of idleness,
the date and time may need to be reset. All other settings are
retained permanently.
7 Service menu
The menu of the solar controller is adapted to your system
automatically. Some menu items are only available if the system
has been set up accordingly and the solar controller has been
set correctly. The menu items are only displayed in systems in
which the corresponding system components are installed,
e.g. two collector arrays. The corresponding menu items and
settings can be found in the respective operating instructions.
Information about the operation of the service menu are
summarised in Chapter 4, starting on page 7.
Menu: Service menu
Commissioning
Start configuration wizard?
Operating mode
Extension module
Change solar configuration
Type collector array 1
Question Answer / setting
What type of collectors are
installed in the collector
array?
Flat-plate collector |
Vacuum tube collector
Gross collector area 2
Question Answer / setting
How large is the gross
collector area?
0 to 500 m
2
Type collector array 2
Question Answer / setting
What type of collectors are
installed in the collector
array?
Flat-plate collector |
Vacuum tube collector
Climate zone
Question Answer / setting
Which value corresponds to
the climate zone where the
solar system is installed?
Search the location of the
solar system in the climate
zone map ( Solar module
installation instructions)
and enter the value of the
climate zone.1...90...255
(90 is default figure)
Start solar thermal system
Question Answer / setting
Is the solar system filled and
vented? Do you want to
start the solar system now?
Yes | No
Menu item
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch CS 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch CS 200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Worcester-Bosch CS 200

Worcester-Bosch CS 200 Gebruiksaanwijzing - English - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info