697462
12
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
12
Service menu
CS200 – 6720830475 (2015/06)
7.1 Solar system settings
Fig. 8 Solar settings menu
If a solar system with extended functionality is installed,
corresponding menus and menu items become active. The
menus of the solar system are described in detail in the
operating instructions of the module installed (e.g. MS 200).
In the Solar settings menu with all solar systems the sub-
menus listed in Tab. 7 are available.
If the solar collector area is incorrectly set, the solar yield
displayed in the info menu is wrong as well.
Table 7 General settings for the solar system
7.2 Diagnosis
Fig. 9 Diagnosis menu
The Diagnosis service menu contains a number of tools for
diagnosis. Note that the menu items shown will vary depending
on the heating system.
7.2.1 Function tests
This menu can be used to test active system components
individually. If Enable function tests is set to Yes in this menu,
the normal heating operation is interrupted in the entire
system. All settings are saved. The settings in this menu are only
temporary and revert to the respective default settings as soon
as the Enable function tests is set to No or the Function test
menu is closed. The available functions and the possible
settings vary depending on the system installed.
A function test is performed by setting the parameters of the
listed component accordingly. You can check whether the
mixer, pump or valve responds appropriately by inspecting the
behaviour of the corresponding component.
The solar pump can be tested, for instance:
Off: The pump stops.
On: The pump starts.
7.2.2 Monitored values
System settings and measurements are displayed in this menu.
For example, the system can display whether the maximum
collector temperature or the current cylinder temperature has
been reached.
You can also call up detailed information on system parts, e.g.
the swimming pool. The information and values that are
provided depend on the system that has been installed.
Observe the technical documentation for modules and other
system components.
7.2.3 Fault displays
The current faults and the fault history can be called up in this
menu.
Table 8 Information in the fault display menu
7.2.4 System information
The software versions of the BUS nodes installed in the system
can be called up in this menu.
7.2.5 Maintenance
You can add a contact address in this menu. When the user
interface displays a fault code, the added address is also
displayed. The end customer can notify the installer to arrange
an appointment ( Chapter 9, page 14).
Menu item Purpose of the menu
Change solar
configuration
Graphical configuration of the solar
system
Current solar
configuration
Graphical representation of the
configured solar system
Solar parameters Settings for the installed solar system
Start solar thermal
system
Once all required parameters have been
set, the solar system can be started up.
0010003272-001
0010003114.001
Menu item Description
Active faults All current faults that are present in the
system are displayed here according to
their severity.
Fault history The last 20 faults are displayed here,
sorted in order of the time of occurrence.
The fault history can be deleted in the
Reset menu ( Chapter 7.2.6,
page 13).
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch CS 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch CS 200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Worcester-Bosch CS 200

Worcester-Bosch CS 200 Gebruiksaanwijzing - English - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info