697462
8
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
8
Commissioning
CS200 – 6720830475 (2015/06)
4.3 Operating the service menu
Closing and opening the service menu
Opening the service menu
Hold the menu key until the service menu is displayed.
Closing the service menu
If no sub-menu is open, press the Back key to switch to the
standard display.
-or-
Press and hold the Back key for a few seconds to switch to
the standard display.
Navigating through the menu
Turn the rotary control knob to highlight a menu or a menu
item.
Press the rotary control knob.
The menu or the menu item is displayed.
Press the Back key to return to the previous menu level.
Changing setting values
Selection
Turn the rotary control knob to highlight an entry.
Slider
Turn the rotary control knob to move the displayed sliding
scale and set the value between minimum and maximum.
Selection with slider
Turn the rotary control knob to highlight an entry.
Press the rotary control knob to confirm the selection.
The input field and the slider are enabled.
Turn the rotary control knob to set the setting value
between minimum and maximum.
Multiple selection
Turn the rotary control knob to highlight an entry.
Press the rotary control knob to select the entry.
Press the rotary control knob again to cancel the selection.
Repeat the action steps until the desired entries are
selected.
Time program
Turn the rotary control knob to highlight a switching time or
the corresponding operating mode.
Press the rotary control knob to activate the input field for
the switching time or the operating mode.
Turn the rotary control knob to change the setting value.
Confirming or rejecting the change
Rejecting the change
Press the rotary control knob to activate the marked entry
or to confirm the change.
Turn the rotary control knob to highlight Continue and
press the rotary control knob.
The Display switches to the previous menu level. The solar
controller operates with the modified setting.
Rejecting the change
Press the Back button.
4.4 Overview of the service menu
These instructions contain an overview of the menu structure.
More detailed information about the menu items and their
functions can be found in the technical documentation of the
installed solar modules (i.e. MS 200).
Table 5 Overview of the service menu
5 Commissioning
System schematics can be found in the technical
documentation of the modules MS 100/MS 200.
5.1 Overview of the commissioning steps
1. Ensure correct installation of Solar heating system
(observe instructions for all assemblies and components)
2. Initial charging with fluids and hydrostatic test
3. Electrical wiring
4. Coding of the modules (observe instructions of the
modules)
Menu and purpose of the menu Page
Commissioning 8
Start the configuration wizard, check and, if
necessary, adjust the most important settings for
the system.
Solar settings 12
Configuring the solar system
Diagnosis 12
System diagnosis:
Perform function test of individual
components (e.g. pumps).
Compare the set and actual values.
Display current faults and the fault history.
Display the software versions of all BUS
nodes.
Additional functions:
Enter installer address.
Calibrate the time.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch CS 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch CS 200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Worcester-Bosch CS 200

Worcester-Bosch CS 200 Gebruiksaanwijzing - English - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info