POWDPG80460 EN
Copyright © 2021 VARO P a g e | 12 www.varo.com
▪ NOTE: Never dispose of residual chemicals or contaminated rinsing solutions in
waterways, drains, sewers, street gutters, or manholes.
▪ Dispose of residual chemicals and used containers in accordance with local waste
disposal regulations.
13.1.2 Cleaning the tank
▪ Fill the tank about one-third full with clean water. A small amount of mild household
detergent may be added.
▪ NOTE: Never use flammable chemicals or abrasive cleaning agents to clean the tank.
▪ Wipe the outside of the tank with a clean, dry cloth.
▪ Reinstall the lid (4).
▪ Reinstall the battery pack (18). Spray until the tank has been emptied. Make sure to direct
the spray toward an area that will not be damaged by the spray solution.
▪ Refill and repeat the procedure with clean water. It may be necessary to rinse the tank
more than once, then drain again as directed above.
▪ Allow all pieces to completely dry before reinstalling parts and storing the unit.
13.1.3 Cleaning the nozzle
▪ If the nozzle becomes plugged, use the steps below to clear.
▪ Remove the battery pack (18).
▪ Unscrew and remove the nozzle from the spray wand.
▪ Push a small wire through the cross holes to clear any debris. If necessary, rinse the cross
holes and nozzle with clean water.
▪ Wipe the nozzle and cross holes with a clean dry cloth and reinstall the nozzle.
13.2 Maintenance
▪ Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
▪ In order to maintain battery capacity, we recommend the battery to be completely
discharged every one month and fully recharged again .Only store with a fully charged
battery and top-up the charge from time to time if stored for a long time. Store in a dry and
frost-free place, the ambient temperature should not exceed 40°C.
14 TECHNICAL DETAILS
