Handleiding Varo POWDPG80460 DRUKSPROEIER (pagina 1 van 13) (Engels)

756759

Verklein

Vergroot

Pagina terug

1/13

Pagina verder

  POWDPG80460  EN 
Copyright © 2021 VARO  P a g e  | 1  www.varo.com 
INTENDED USE .............................................................................. 3 
DESCRIPTION (FIG. A) .................................................................. 3 
PACKAGE CONTENT LIST ............................................................ 3 
SYMBOLS ....................................................................................... 4 
GENERAL POWER TOOL SAFETY WARNINGS ......................... 4 
1 Working area .......................................................................................................... 4 
2 Electrical safety ..................................................................................................... 4 
3 Personal safety ...................................................................................................... 5 
4 Power tool use and care ........................................................................................ 5 
5 Service .................................................................................................................... 6 
ADDITIONAL SAFETY INSTRUCTIONS FOR SPRAYER ............ 6 
RESIDUAL RISKS .......................................................................... 7 
ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND 
CHARGERS .................................................................................... 8 
1 Batteries ................................................................................................................. 8 
2 Chargers ................................................................................................................. 8 
CHARGING AND INSERTION OR REMOVAL OF BATTERY ...... 8 
1 Charger indications (Fig. 1) ................................................................................... 8 
2 Removal / insertion of battery (Fig. 2) .................................................................. 9 
3 Battery capacity indicator (Fig. 3) ......................................................................... 9 
BEFORE USE ................................................................................. 9 
1 Mixing the spray solution ...................................................................................... 9 
2 Filling the container ............................................................................................... 9 
3 Application ............................................................................................................. 9 
4 Transportation and storage ................................................................................ 10 
ASSEMBLY ................................................................................... 10 
1 Assembling the strap .......................................................................................... 10 
2 Assembling the spray nozzle .............................................................................. 10 
OPERATION.................................................................................. 10 
1 Turning the sprayer ON/OFF (Fig.6 ) .................................................................. 10 

  POWDPG80460  EN 
Copyright © 2021 VARO  P a g e  | 2  www.varo.com 
2 Lock-on (Fig.7) ..................................................................................................... 11 
3 Filling the tank ..................................................................................................... 11 
4 Spraying home and garden chemicals ............................................................... 11 
CLEANING AND MAINTENANCE ............................................... 11 
1 Cleaning ............................................................................................................... 11 
1.1 Draining the tank.................................................................................................... 11 
1.2 Cleaning the tank ................................................................................................... 12 
1.3 Cleaning the nozzle ............................................................................................... 12 
2 Maintenance ......................................................................................................... 12 
TECHNICAL DETAILS .................................................................. 12 
WARRANTY .................................................................................. 13 
ENVIRONMENT ............................................................................ 13 
 

POWDPG80460 EN

GARDEN SPRAYER BACKPACK 20V (NO ACCU)

POWDPG80460

1 INTENDED USE

The cordless sprayer is intended for outdoor use in a well-ventilated area. The product is

designed for spraying consumer-grade home and garden chemicals such as insecticides,

fungicides, weed killers and fertilizers. The product may also be used to water plants. Not

suitable for professional use.

WARNING! Read this manual and general safety instructions carefully

before using the appliance, for your own safety. Your power tool should

only be passed on together with these instructions.

2 DESCRIPTION (FIG. A)

1. Fan nozzle

2. Shower nozzle

3. Handle

4. Lid

5. Barrel body

6. Pedestal

7. Outlet

8. Double nozzle

9. Conical nozzle

10. Outlet component

11. Gun bar

12. Gun switch

13. Gun rack

14. Outlet pipe

15. Strap

16. Power button

17. Lock on switch

18. Battery pack (not included)

19. Battery release button

20. Battery indicator

21. Charger(not included)

3 PACKAGE CONTENT LIST

▪ Remove all packaging materials.

▪ Remove remaining packing and package inserts (if included).

▪ Check that the package contents are complete.

▪ Check the appliance, the power cord, the power plug and all accessories for transportation

damage.

▪ Keep the packing materials as far as possible till the end of the warranty period. Dispose it

into your local waste disposal system afterwards.

WARNING: Packaging materials are not toys! Children must not play with

plastic bags! Danger of suffocation!

1x Machine

1x Manual

1x spray lance

1x belt

4x nozzles

If any parts are missing or damaged, please contact your dealer.

POWDPG80460 EN

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:

Denotes risk of personal

injury or damage to the tool.

In accordance with essential

requirements of the

European directive(s)

Read manual before use

"Class II - The machine is

double insulated; Earthing

wire is therefore not

necessary (only for charger)

Ambient temperature 40°C

max. (only for battery)

Do not expose charger and

battery pack to water

Use battery and charger only

in closed rooms

Do not incinerate battery

pack or charger

Wear gloves.

Wear a mask In dusty

conditions

Do not expose filled sprayer

to direct sunlight.

Mandatory use of eye

protection.

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and instructions. Failure to heed warnings and follow instructions

may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions

for future reference. The term "power tool" in the safety warnings refers to your mains-

operated (corded) power tool or battery- operated (cordless) power tool.

5.1 Working area

▪ Keep working area clean and well lit. Untidy and dark areas can lead to accidents.

▪ Do not operate power tools in potentially explosive surroundings, for example, in the

presence of inflammable liquids, gases or dust. Power tools create sparks which may

ignite the dust or fumes.

▪ Keep children and bystanders at a distance when operating a power tool. Distractions can

cause you to lose control of it.

5.2 Electrical safety

▪ Always check that the power supply corresponds to the voltage on the rating plate.

▪ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use

adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce

the risk of an electric shock.

▪ Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and

refrigerators. There is an increased risk of an electric shock if your body is earthed.

▪ Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will

increase the risk of an electric shock.

POWDPG80460 EN

▪ Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power

tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of an electric shock.

▪ When operating a power tool outdoors, use an extension cable suitable for outdoor use.

Using a cord suitable for outdoor use reduces the risk of an electric shock.

▪ If operating a power tool in a damp location is unavoidable, use a power supply protected

by a residual current device (RCD). Using an RCD reduces the risk of an electric shock.

5.3 Personal safety

▪ Stay alert, watch what you are doing and use common sense when operating a power

tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or

medication. A moment of inattention when operating a power tool may result in serious

personal injury.

▪ Use safety equipment. Always wear eye protection. Using safety equipment such as a

dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed

will reduce the risk of personal injury.

▪ Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.

Carrying power tools with your finger on the switch or plugging in power tools when the

switch is in the on position makes accidents more likely.

▪ Remove any adjusting keys or spanners before turning on the power tool. A spanner or

key left attached to a rotating part of the power tool may result in personal injury.

▪ Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable

you retain control over the power tool in unexpected situations.

▪ Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and

gloves away from the power tool. Loose clothes, jewellery or long hair can become

entangled in the moving parts.

▪ If there are devices for connecting dust extraction and collection facilities, please ensure

that they are attached and used correctly. Using such devices can reduce dust-related

hazards.

5.4 Power tool use and care

▪ Do not expect the power tool to do more than it can. Use the correct power tool for what

you want to do. A power tool will achieve better results and be safer if used in the context

for which it was designed.

▪ Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken

switch is dangerous and must be repaired.

▪ Disconnect the plug from the power source before making adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

▪ Store power tools, when not in use, out of the reach of children and do not allow people

who are not familiar with the power tool or these instructions to operate it. Power tools are

potentially dangerous in the hands of untrained users.

▪ Maintain power tools. Check for misalignment or jammed moving parts, breakages or any

other feature that might affect the operation of the power tool. If it is damaged, the power

tool must be repaired. Many accidents are caused by using poorly maintained power tools.

▪ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to jam and are easier to control.

▪ Use the power tool, accessories and cutting tools, etc., in accordance with these

instructions and in the manner intended for the particular type of power tool, taking into

account the working conditions and the work which needs to be done. Using a power tool

in ways for which it was not intended can lead to potentially hazardous situations.

POWDPG80460 EN

5.5 Service

▪ Your power tool should be serviced by a qualified specialist using only standard spare

parts. This will ensure that it meets the required safety standards.

6 ADDITIONAL SAFETY INSTRUCTIONS FOR SPRAYER

▪ Never spray at people. Never aim the nozzle at another person or animal. Never allow the

spray to come into direct contact with the skin.

▪ This spray gun must not be used for spraying flammable paints and solvents with a flash

point of less than 21°C.

▪ Always make sure that there is adequate ventilation in the work area when spraying.

▪ Always keep the spray basket nozzle in place during use.

▪ Do not use spray guns where there is a risk of fire or explosion.

▪ Be aware of any hazard by the material being sprayed and consult the markings on the

container or the information supplied by the manufacturer.

▪ Do not spray any material where the hazard is not known.

▪ Always use appropriate eye protection to keep hazardous vapors or fumes out of the eyes.

▪ Never operate a spray gun without wearing a face mask.

▪ Wear ear protector if the sound pressure exceeds 85dB(A).

▪ Keep your spray gun, paint container and nozzles clean. Do not clean with flammable

liquids with a flash point less than 21°C. Inspect the mains leas periodically and if

damaged have it replaced by a qualified person.

▪ Never spray near a naked flame or appliance pilot flame.

▪ Never smoke whilst spraying.

▪ Always read the paint manufacturers thinning recommendations or instructions before

using pain or other materials.

▪ Always disconnect from the mains supply when filling the paint container or cleaning the

spray gun.

▪ Avoid running the unit with the flow rate knob fully closed for any length of time.

▪ Never allow children, persons with reduced physical, sensory, or mental capabilities or

lack of experience and knowledge, or people unfamiliar with these instructions to use the

product.

▪ Be aware of any hazards presented by the spray materials. Before using any pesticide or

other spray materials with the product, carefully read the label on the original container

and follow the instructions.

▪ Keep the area clear of all bystanders, children, and pets while spraying.

▪ Ensure that the spray wand is securely connected to the spray wand handle before using

the product. If necessary, use pliers to attach the spray wand to the spray wand handle.

▪ Remember to properly replace and tighten the spray tank cover after pouring liquid into

the spray tank.

▪ Use only consumer-grade water-based lawn and garden chemicals.

▪ Do not use commercial-grade chemicals or chemicals for commercial or industrial

purposes.

▪ Do not leave residue or spray material in the spray tank after using the product. Clean

after each use.

▪ Do not pour hot or boiling liquids into the spray tank. These can weaken or damage the

hose or spray tank.

▪ Do not overfill the tank.

▪ Always check for leaks. If any are found, correct them before using the product.

▪ Always inspect both the inside and outside of the product before each use.

▪ Liquids to be sprayed must be as thin as water. Thicker liquids will not spray properly.

▪ Spray materials may be premixed and poured into the spray tank using a funnel, if

necessary.

POWDPG80460 EN

▪ NOTE: When using a measuring container other than the measuring cup, or when using a

funnel to fill the tank, thoroughly clean and rinse these items after use. When premixing

spray materials, rinse the container used for mixing.

▪ Do not spray where spark, flame, or other source of ignition is present.

▪ Do not spray in the direction of people or animals. Always spray downwind.

▪ Do not smoke, eat, or drink while using the product.

▪ Do not discharge directly against skin.

▪ Do not let the spray materials come in contact with skin. If contact does occur, wash

immediately with soap and plenty of water.

▪ Aim the nozzle directly at the plants or objects you intend to spray.

▪ Ensure that the spray materials are directed at an area that will not be damaged by the

spray materials.

▪ Avoid spraying on windy days. The spray materials can be accidentally blown onto plants

or objects that should not be sprayed.

▪ Especially in warmer weather, spray in the early morning or late afternoon. Excessive heat

can evaporate the spray before it settles.

▪ Keep spray materials away from eyes. If spray materials come in contact with the eyes,

wash them immediately with clean water. If irritation is still present, immediately seek

medical help.

▪ The product may be operated with the spray wand handle resting in the cradle, or may be

removed from the cradle and be held by the operator.

▪ Electric shock hazard. Do not spray towards electrical outlets.

▪ After every use, thoroughly wash your hands and any area where skin has been exposed

to the spray.

▪ Maintain the product. Thoroughly inspect both the inside and outside of the product and

examine the components before each use. Check for cracked and deteriorated hoses,

leaks, clogged nozzles, and missing or damaged parts. If damaged, have the product

repaired before use. Many accidents are caused by poorly maintained products.

▪ Remove the battery from the product before draining, cleaning, or storing to avoid

accidental starting.

7 RESIDUAL RISKS

Even when the power tool is used as prescribed it is not possible to eliminate all residual risk

factors. The following hazards may arise in connection with the power tool’s construction and

design:

▪ Damage to lungs if an effective dust mask is not worn.

▪ Damage to hearing if effective hearing protection is not worn.

▪ Damages to health resulting from vibration emission if the power tool is being used over

longer period of time or not adequately managed and properly maintained.

WARNING! This power tool produces an electromagnetic field during

operation. This field may under some circumstances interfere with active or

passive medical implants. To reduce the risk of serious or fatal injury, we

recommend persons with medical implants to consult their physician and

the medical implant manufacturer before operating this machine.

WARNING: Injuries may be caused or aggravated by prolonged use of a

tool. When using any tool for prolonged periods, ensure you take regular

breaks.

POWDPG80460 EN

8 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS

8.1 Batteries

▪ Never attempt to open for any reason.

▪ Do not store in locations where the temperature may exceed 40 °C.

▪ Charge only at ambient temperatures between 4 °C and 40 °C.

2 Store your batteries in a cool dry place (5 °C-20 °C). Never store batteries in discharged

state.

3 It is better for Li-ion batteries to discharge and reload them regularly (at least 4 times a

year). The ideal charge for long-term storage of your Li-ion battery is 40% of capacity.

▪ When disposing of batteries, follow the instructions given in the section “Protecting the

environment”.

▪ Do not cause short circuits. If connection is made between the positive (+) and negative (-)

terminal directly or via accidental contact with metallic objects, the battery is short circuited

and an intense current will flow causing heat generation which may lead to casing rupture

or fire.

▪ Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators

and other polymer components may be damaged resulting in electrolyte leakage and/or

internal short circuiting leading to heat generation causing rupture or file. Moreover do not

dispose of the batteries in fire, explosion and/or intense burning may result.

▪ Under extreme conditions, battery leakage may occur. When you notice liquid on the

battery, proceed as follows:

− Carefully wipe the liquid off using a cloth. Avoid skin contact.

− In case of skin or eye contact, follow the instructions below:

✓ Immediately rinse with water. Neutralize with a mild acid such as lemon juice or

vinegar.

✓ In case of eye contact, rinse abundantly with clean water for at least 10 minutes.

Consult a physician.

Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do

not incinerate the battery.

8.2 Chargers

▪ Never attempt to charge non-rechargeable batteries.

▪ Have defective cords replaced immediately.

▪ Do not expose to water.

▪ Do not open the charger.

▪ Do not probe the charger.

▪ The charger is intended for indoor use only.

9 CHARGING AND INSERTION OR REMOVAL OF BATTERY

9.1 Charger indications (Fig. 1)

Connect the charger to the power outlet socket

▪ Solid green: ready to charge

▪ Flickering red: charging

▪ Solid green: charged

▪ Solid green and red: battery or charger damaged

POWDPG80460 EN

Note: if the battery does not fit properly, disconnect it and confirm that the

battery pack is the correct model for this charger as shown on the

specification chart. Do not charge any other battery pack or any battery

pack that does not securely fit the charger.

1. Frequently monitor the charger and battery pack while connected

2. Unplug the charger and disconnect it from the battery pack when finished.

3. Allow the battery pack to cool completely before using it.

4. Store the charger and battery pack indoors, out of reach of children.

NOTE: If battery is hot after continuous use in the tool, allow it to cool

down to room temperature before charging. This will extend the life of your

batteries.

9.2 Removal / insertion of battery (Fig. 2)

WARNING: Before making any adjustments ensure the hedge trimmer is

switched off or remove the battery pack.

▪ Hold the tool with one hand and the battery pack (18) with the other.

▪ To install: push and slide battery pack into battery port, make sure the release latch on the

rear side of the battery snaps into place and battery is secure before beginning operation.

▪ To remove: Press the battery release latch and pull the battery pack out at the same time.

9.3 Battery capacity indicator (Fig. 3)

There are battery capacity indicators on the battery pack, you can check the capacity status of

the battery if you squeeze the button. Before using the machine, please press switch trigger to

check if the battery is full enough for properly working.

Those 3 LED might show the status of the capacity level of the battery:

3 LED’s are lit: Battery fully charged

2 LED’s are lit: Battery 60% charged

1 LED is lit: Battery almost discharged

10 BEFORE USE

10.1 Mixing the spray solution

▪ Never spray liquid plant control chemicals undiluted.

▪ Prepare solution and fill the container outdoors only or in well-ventilated locations.

▪ Only prepare sufficient solution for the job in hand so that nothing is left over.

▪ Do not mix different chemicals unless such a mixture is approved by the manufacturer.

10.2 Filling the container

▪ Stand the sprayer on a level surface, do not fill the container above the maximum mark.

▪ When filling from central water supply, do not immerse the end of the hose in the solution,

sudden low pressure in the system may cause the solution to be sucked back into the

water supply.

▪ Before filling the container with spray solution, carry out test run with fresh water and

check all parts of the sprayer for leaks.

▪ After filling, fit the lid and tighten it firmly.

▪ Hang a tag to the product to note what chemical is being used.

10.3 Application

▪ Work only in the open or in very well ventilated locations, e.g. open greenhouses.

POWDPG80460 EN

▪ Never blow through nozzles or other components by mouth.

▪ Avoid contact with plant control chemicals – immediately change clothing contaminated

with plant control chemical.

▪ Do not spray in windy conditions.

▪ Too high or too low a pressure or unfavorable weather conditions can result in the wrong

solution concentration. Overdosing may damage plants and the environment. Underdosing

may result in unsuccessful plant treatment.

▪ In order to reduce the risk of damage to the environment and plants, do not operate the

sprayer: i. pressure is too high or too low

ii. in windy conditions

iii. in direct sunlight

▪ In order to reduce the risk of accidents and damage to the sprayer, never operate the

sprayer with: i. flammable liquids

ii. viscous or sticky liquids

iii. caustic or corrosive chemicals

iv. liquids hotter than 50°C

▪ Avoid use the product in cold winter since the solution may be freeze.

10.4 Transportation and storage

▪ Remove the battery pack.

▪ Ensure that all parts are clean and dry.

▪ Clean all foreign materials from the product.

▪ Drain all spray materials from the spray tank before storage and transportation.

▪ After each use, check all parts of the unit for leaks. Return the product to an authorized

service center for repair if has any.

▪ The spray wand can be stored in the cradle.

▪ For transportation, secure the product against movement or falling to prevent injury to

persons or damage to the product.

▪ Store the product in a cool, dry and well-ventilated place that is inaccessible to children.

Keep away from corrosive agents such as garden chemicals and de-icing salts. Do not

store outdoors.

11 ASSEMBLY

WARNING: Switch off and remove battery from machine before adjusting or

cleaning!

11.1 Assembling the strap

▪ Attach the strap (15) to the sprayer as shown in fig.4.

11.2 Assembling the spray nozzle

▪ Install the gun bar and nozzle of choice on the gun handle as shown in fig.5.

12 OPERATION

12.1 Turning the sprayer ON/OFF (Fig.6 )

▪ To turn the sprayer ON, depress the ON/OFF button (16).

▪ To start the flow of liquid at the spray wand, depress the trigger (12).

▪ To stop the flow of liquid at the spray wand, release the trigger (12).

▪ To turn the sprayer OFF, depress the ON/OFF button again (16).

POWDPG80460 EN

12.2 Lock-on (Fig.7)

▪ The lock-on feature is convenient when spraying for an extended period of time or when

covering a large area.

▪ To lock-on, press the trigger (12) and slide the lock on switch (17) forward.

▪ To release the lock-on, press the trigger (12) and slide the lock on switch backward (17) ,

release the trigger (12).

▪ NOTE: make sure the trigger is not locked on before inserting the battery pack into the

sprayer.

12.3 Filling the tank

▪ Liquids to be sprayed must be as thin as water. Thicker liquids will not spray properly.

▪ Do not overfill the tank.

▪ Remove the battery pack (18).

▪ Remove the lid (4). Fill the tank with the desired amount of water.

▪ Measure the recommended amount of liquid.

▪ Carefully pour the liquid into the tank.

▪ Reinstall the lid (4) and make sure it is fixed securely.

▪ Reinstall the battery pack (18).

▪ Spray solutions may be premixed and poured into the sprayer, using a funnel if needed.

▪ NOTE: be sure to thoroughly clean and rinse the measuring cup or funnel after use. If

premixing the spray solution, rinse the container used for mixing.

NOTE: It is important to thorougly clean the unit after each use. Allowing

liquid to remain in an idle tool for an extended period may cause its moving

pieces and connectors to seize up.

12.4 Spraying home and garden chemicals

▪ Install the battery pack (18) into the tool.

▪ Depress the ON/OFF button (16) to start the motor.

▪ Aim the sprayer nozzle directly at the plants or objects you wish to spray.

▪ NOTE: Make sure to stand far enough from the object being sprayed to prevent the spray

from splashing back onto you.

▪ Depress the trigger (12) to start the spray. Release the trigger (12) to stop the spray.

▪ Always empty, clean, and drain the tank after every use as directed in the Maintenance

section.

▪ Thoroughly clean the chemical sprayer before storing or before switching to a different

chemical. See Cleaning the Unit later in this manual.

▪ When you are finished with the sprayer, thoroughly wash your hands and any area where

skin has been exposed to the spray.

13 CLEANING AND MAINTENANCE

13.1 Cleaning

13.1.1 Draining the tank

▪ If there is any liquid left in the tank after spraying, the tank should be drained before

cleaning.

▪ Remove the battery pack (18).

▪ Remove the lid (4).

▪ Drain the contents through the fill area.

▪ NOTE: Drain the contents back into the original container. Do not store chemicals in the

tank.

POWDPG80460 EN

▪ NOTE: Never dispose of residual chemicals or contaminated rinsing solutions in

waterways, drains, sewers, street gutters, or manholes.

▪ Dispose of residual chemicals and used containers in accordance with local waste

disposal regulations.

13.1.2 Cleaning the tank

▪ Fill the tank about one-third full with clean water. A small amount of mild household

detergent may be added.

▪ NOTE: Never use flammable chemicals or abrasive cleaning agents to clean the tank.

▪ Wipe the outside of the tank with a clean, dry cloth.

▪ Reinstall the lid (4).

▪ Reinstall the battery pack (18). Spray until the tank has been emptied. Make sure to direct

the spray toward an area that will not be damaged by the spray solution.

▪ Refill and repeat the procedure with clean water. It may be necessary to rinse the tank

more than once, then drain again as directed above.

▪ Allow all pieces to completely dry before reinstalling parts and storing the unit.

13.1.3 Cleaning the nozzle

▪ If the nozzle becomes plugged, use the steps below to clear.

▪ Remove the battery pack (18).

▪ Unscrew and remove the nozzle from the spray wand.

▪ Push a small wire through the cross holes to clear any debris. If necessary, rinse the cross

holes and nozzle with clean water.

▪ Wipe the nozzle and cross holes with a clean dry cloth and reinstall the nozzle.

13.2 Maintenance

▪ Our machines have been designed to operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation depends upon proper machine care

and regular cleaning.

▪ In order to maintain battery capacity, we recommend the battery to be completely

discharged every one month and fully recharged again .Only store with a fully charged

battery and top-up the charge from time to time if stored for a long time. Store in a dry and

frost-free place, the ambient temperature should not exceed 40°C.

14 TECHNICAL DETAILS

Type

POWDPG80460

Rated voltage

20V

Flow speed

1500ml/min.

Tank capacity

16L

Pressure

6 bar

POWDPG80460 EN

15 WARRANTY

▪ This product is warranted for a 36-month period effective from the date of purchase by the

first user.

▪ This warranty covers all material or production flaws excluding : batteries, chargers,

defective parts subject to normal wear & tear such as bearings, brushes, cables, and

plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects

resulting from maltreatment, accidents or alterations; nor the cost of transportation.

▪ Damage and/or defects resulting from inappropriate use also do not fall under the

warranty provisions.

▪ We also disclaim all liability for any bodily injury resulting from inappropriate use of the

tool.

▪ Repairs may only be carried out by an authorised customer service centre for Powerplus

tools.

▪ You can always obtain more information at the number 00 32 3 292 92 90.

▪ Any transportation costs shall always be borne by the customer, unless agreed otherwise

in writing.

▪ At the same time, no claim can be made on the warranty if the damage of the device is the

result of negligent maintenance or overload.

▪ Definitely excluded from the warranty is damage resulting from fluid permeation, excessive

dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate

usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not

following the instructions given in the manual), inexpert assembly, lightning strike,

erroneus net voltage. This list is not exhaustive.

▪ Acceptance of claims under warranty can never lead to the prolongation of the warranty

period nor commencement of a new warranty period in case of a device replacement.

▪ Devices or parts which are replaced under the warranty therefore remain the property of

Varo NV.

▪ We reserve the right to reject a claim whenever the purchase cannot be verified or when it

is clear that the product has not been properly maintained. (Clean ventilation slots, carbon

brushes serviced regularly, etc.).

▪ Your purchase receipt must be kept as proof of date of purchase.

▪ Your appliance must be returned undismantled to your dealer in an acceptably clean state,

(in its original blow-moulded case if applicable to the unit), accompanied by proof of

purchase.

▪ Your tool must be charged at least 1x per month to ensure optimal operation of this tool.

16 ENVIRONMENT

Should your appliance need replacement after extended use, do not dispose of it

with the household refuse, but in an environmentally safe way.

Waste produced by electrical machine items should not be handled like normal

household rubbish. Please recycle where recycle facilities exist. Check with your

Local Authority or retailer for recycling advice.

Varo POWDPG80460 DRUKSPROEIER Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Varo POWDPG80460 DRUKSPROEIER

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info