79
Remote control
Feature functions (continued)
Remote activation of the answer mode
If you forgot to switch on the answering mode, you can do this remotely. Just call your tiptel 195.
After about 50 seconds the device picks up. Now, please enter your personal remote control
code. If the remote control code was identified, the selected outgoing message is played back
for control purposes. The device can now be operated remotely. The answering machine will
activate the answer mode and will answer incoming calls as soon as you replace the handset or
stop the remote control function ( button and button).
The remote activation of the answer mode is only possible if you programmed "remote answe-
ring mode = on".
Remote erase during the remote interrogation
During the remote interrogation, you have the option to erase the currently played back incoming
message remotely. The recording capacity will be available for new incoming messages imme-
diately. Should you wish to protect your recorded incoming message against an unwanted erase,
you can define this via the settings of the remote control. For this purpose, you just have to set
"remote erase = off".
Remote pre-interrogation free of charge (T
oll saver)
The remote pre-interrogation function informs you whether new messages have been recorded
without costing you a phone call. Where no new incoming messages have been recorded, the
pick-up delay time is increased by 10 seconds. If the answering machine does not pick up after
the programmed delay time, this indicates that no new messages exist and you can replace the
handset, (thus saving a call charge).
The remote pre-interrogation is only possible after having set the corresponding remote control
settings to "remote pre-interrogation free of charge".
Remote control functions
Button Function Remark/operation
Room monitoring Room monitoring: The microphone of your tiptel 195 is
turned on and you can listen to what is happening in the
surroundings of the device.
Remote interrogation The answering machine plays back all new messages that
of new messages have been recorded since your last remote interrogation.
When all messages have been played back, you will hear
the voice message "end of messages".
Remote interrogation The answering machine plays back all messages that have
of all messages been recorded since the answering mode was activated.
