782182
12
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
english 13
To this purpose, set the swinging part to and fix it •
with the adjustment handle.
Place the wood into the recess and saw it carefully •
exerting a uniform pressure.
Switch off the machine and remove the wedges.•
Caution: Feed the work piece only with your hand on •
the cross-cutting gauge. Do not hold the work piece
by hand.
Changing the sawblade, Fig. 12.1 and 12.2
Attention: Pull the power plug!
Screw out the two upper bolts M 8 (1) from the lower •
sawblade guard.
Swing down the sawblade guard. Release the tension •
nut (M 20, left-hand thread) and fix it with the holding
key (Fig. 12.2).
Wear gloves to protect your hands. •
Remove the sawblade and fit a now one. •
Only mount a well sharpened, crack-free and not •
deformed sawblade.
Tighten the tension nut, fixing it with the holding key •
(left-hand thread!).
Raise the lower sawblade guard, re-insert the two bolts •
M 8 and tighten them.
After every sawblade change, the riving knife must be •
adjusted anew - see Setting the riving knife Fig. 2.
Maintenance
Switch the motor off and pull the power plug before doing
any maintenance and cleaning work.
After servicing the machine, all guards and safety devices
must be refitted.
The construction saw, including the electric motor, •
are maintenance-free to a far extent. An exception are
the sawblades, table inserts and brake linings of the
electric motor (approx. 14,200 switching actions) that
are subject to natural wear and tear.
The sawblade must stop within approx. ten seconds. If •
necessary, the worn table insert must be replaced.
Brake linings may only be replaced by specialists.•
Cleaning
Attention: Pull the power plug!
Wear gloves (risk of cutting).
Always wear goggles for cleaning to protect your eyes. •
Remove dust and dirt at regular intervals.•
Keep the protective sawblade box clean from scrap •
wood and saw dust cloggings.
For a good cleaning compressed air or a hand broom •
are recommended.
Keep the table surface free from resin.•
Caution: Do not use any cleaning agents on the plastic •
parts. We recommend a mild rinsing agent on a moist
cloth.
EC Declaration of Conformity
We herewith declare, scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH, Günzburger Str. 69, D-89335
Ichenhausen that the machine described below due to its con-
struc tion and design and in the version delivered by us complies
with the relevant provisions of the following EC Directives.
In case of a modification of the machine this declara tion ceases
to be valid.
Machine description:
Circular construction saw
Machine type:
structo 5
Relevant EC directives:
EC machine directive 98/37/EG (< 28.12.2009),
EC machine directive 2006/42/EG (> 29.12.2009),
EC Low voltage directive 2006/95/EWG,
EC-EMV directive 2004/108/EWG.
Applied harmonized European Standards
EN 12100-1, EN 12100-2, EN 294, EN 349, EN 418, EN 847-1,
EN 954-1, EN 1088, EN 1870-1, EN 60204-1, EN 55014, EN 60555-
2, EN 60555-3
Notified Body
ISO 7960
The machine corresponds to the checked template according to
Appendix VII:
Fachausschuß Holz; 70504 Stuttgart
Prüf- und Zertifizierungsstelle im BG-PRÜFZERT
Called in for:
EC type-examination
GS-Prüfbescheinigung
Place, date:
Ichenhausen, 15.10.2009
Signature:
Wolfgang Windrich (product manager)
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach Structo 5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach Structo 5 in de taal/talen: Duits, Engels, Frans, Italiaans, Pools, Fins als bijlage per email.

De handleiding is 9.22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info