699578
21
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
CA-6 SATEL 19
In the 0E format (Contact ID selected codes) monitored are all events which have a CID
code and which are assigned, respectively, to the station 1 or 2 in the corresponding
event assignment functions of the control panel, while the events which have no
assignment function (marked in the „Appendix” table as no assignment) are only
monitored when any non-zero monitoring code has been programmed for them.
The telephone line restore and trouble events are always monitored in both Contact ID
formats, while they are not monitored in the other formats.
FS47 - programming monitoring options (BIT)
These options determine the way communication is established with the monitoring
stations and how the event codes are transmitted. The programming consists in lighting up
the LEDs of selected options and confirming the choice with the [#] key.
No. LED Option
1 OFF
2 OFF
transmission to station 1 or station 2 (report is sent to the one station only, to
that, which first answers the call, without event sorting)
1 ON
2 OFF
report to station 1 only, without event sorting
1
OFF
2 ON
report to station 2 only, without event sorting
1
&
2
1
ON
2 ON
transmission to both stations with event sorting (event sorting programmed
with corresponding service functions, separately for each group of events)
ON
reported partition event code extended with user number (access code
number)
5
OFF
automatic extension with user number disabled
ON
reported zone event code extended with zone number (for zone 1 - "1", for
zone 2 - "2" and so on)
6
OFF
extension with the zone number disabled
ON
panel does not send the event code if STATION 1 fails to acknowledge receiving
the information after 16 attempts
7
OFF
the panel skips no codes for STATION 1
ON
the panel skips sending the events code if STATION 2 fails to acknowledge
receiving the information after 16 attempts
8
OFF
the panel skips no codes for STATION 2
Notes:
In case of data formats 4/1 and 3/1, do not enable the options 5 and 6.
The options 5 and 6 are only meaningful when double-character codes are reported. If
this is the case, single-character event codes are programmed (the second character
being 0), and the panel, with the extension option on, will add the zone number or the
user number, respectively, as the second character. The codes programmed as
double-character (both characters different from 0) will be sent in their programmed
form, with no extension. Extension of the event codes by adding the zone / user
number makes it possible to enter identical codes for one type of events for all zones
or partitions, and then to differentiate between them, based on the added zone / user
no. (e.g., it is sufficient to program just one, identical character for all zones from which
the zone alarm code (FS60) is to be sent). This solution has been adopted to facilitate
programming of the event codes.
The options 3 and 4 are not used.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-6 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel CA-6

Satel CA-6 Aanvulling / aanpassing - Deutsch - 19 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 19 pagina's

Satel CA-6 Installatiehandleiding - Deutsch - 80 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 18 pagina's

Satel CA-6 Snelstart handleiding - English - 8 pagina's

Satel CA-6 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info