699578
22
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
20 Programming CA-6
Monitoring - programming identifiers
FS48 - programming event identifier for station 1 (HEX)
FS54 - programming event identifier for station 2 (HEX)
The functions FS48 (station 1) and FS54 (station 2) are used to program the identifiers
transmitted to the monitoring stations. Programming is carried out in the manner typical for
hexadecimal functions (HEX); the LEDs 1 to 8 shows two consecutive characters, which
can be changed by entering new ones. When the first two characters are being
programmed, the lower B LED blinks, and when the other two - the lower A LED.
For the data formats 3/1 and 3/2, the last character should be 0 - the control panel will
send characters from 1 to F, 0 not being sent.
Note: If the monitoring station requires an identifier containing the digit zero, enter the
character “A instead of zero (e.g. the identifier “1203” should be entered as
“12A3”).
EXAMPLE:
programming the identifier for the station 1 = A243
[12345] [#] - enter the service mode
[4][8] [#] - call the function
[
*
0][2] [#] - enter the first two characters of identifier (B LED blinking)
[4][3] [#] - enter the next two characters of identifier (A LED blinking) and confirm them - exit the
function
Monitoring - programming zone event codes
The zone event codes are programmed in the functions FS60, FS61 and from FS63 to
FS65. Each of them is used for programming a code of one event for each of the eight
zones.
The zone event codes may be either single or double character. If a single-character code
is entered (for the data formats 4/1 and 3/1 and also when using the mode with code
extension by zone number, see FS47 "Monitoring options"), one of the characters must
be 0. Programming 00 will result in skipping the event when the events are being
reported to the station.
The programming consists in entering two characters (from 0 to F) for each zone and
confirming them. During the programming, the keypad LEDs show value of the character
entered (from 1 to 4 - the first character, and from 5 to 8 - the second character of the
code) and number of the zone for which the code is programmed (AB, AB LEDs). After the
last zone code is confirmed, the control panel exits the function .
FS60 - programming zone alarm codes (HEX)
The codes programmed with this function are reported when the control panel detects
zone violation, which triggers an alarm.
Codes of 8 control panel zones are programmed in turn.
EXAMPLE:
programming the alarm codes for the zones 1 to 7 (codes from 41 to 47), the zone 8 is
not an alarm one.
[12345] [#] - enter the service mode
[6][0] [#] - call the function
[4][1] [#] - program the code for zone 1
[4][2] [#] - program the code for zone 2
[4][3] [#] - program the code for zone 3
[4][4] [#] - program the code for zone 4
[4][5] [#] - program the code for zone 5
[4][6] [#] - program the code for zone 6
[4][7] [#] - program the code for zone 7
[0][0] [#] - program the code for zone 8 (no event for zone 8), exit the function
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-6 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel CA-6

Satel CA-6 Aanvulling / aanpassing - Deutsch - 19 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 19 pagina's

Satel CA-6 Installatiehandleiding - Deutsch - 80 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 18 pagina's

Satel CA-6 Snelstart handleiding - English - 8 pagina's

Satel CA-6 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info