699577
15
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
CA-10 Installer Manual 13
As the control panel is only accessible to the service, a number of protective devices is
provided to prevent hacking of the system and change of any data by unauthorized persons.
All the data exchanges are authorized by changing the access codes and the data are
encoded.
The DOWNLOADING can be particularly useful to installation firms engaged in servicing
many alarm systems. Then the user suggested inspections and modifications of software will
not necessarily require troublesome and costly traveling they will be carried out with a
computer via the telephone line. Such a method of customer service and technical control of
customer systems will allow creation of alarm equipment services at an advanced and
professional level.
INSTALLATION OF THE CONTROL PANEL
Description of control panel main board
The control panel main board contains electronic components sensitive to
electric charges. Prior to installation, these charges must be removed. During
installation, avoid touching any elements on the control panel main board.
Explanations for Fig. 1:
1. The Battery cables connect the red one to the battery terminal “+” and the black one to
the battery terminal “-“. The battery circuit is protected with a 2.5 A polymer fuse. Metal
connectors, which come with the control panel, can be used for connecting cables to the
battery (bolted connection, e.g. 17 Ah battery). Owning to that the battery cables lugs
should not be cut off.
2. The J20 pins are used for setting the battery charging current:
350 mA – pins shorted,
700 mA – pins open.
3. The RJ socket for connection of the control panel RS-232 port to the computer.
The RS-232 port is intended for programming the alarm system parameters from the
computer. For programming, a cable available in the kit designated DB9F/RJ-KPL is
required.
Notes:
Do not short or touch the connector pins with your fingers.
Prior to connecting the cable, the installer should first remove the electrostatic charge
e.g. touching a grounded fixture (a faucet or a heater) with the top of his hand.
It is recommended that the cable be first connected to the control panel, and then to the
computer.
The cable connecting the RS-232 ports may be up to twenty meters long.
4. The DIALER LED is on during telephone messaging by the panel, and blinks during
pulse dialing of the telephone number.
5. The J19 RESET pins make it possible to start the service mode without entering any
service code. This function can be disabled by the installer with software means (service
function FS131).
6. The BATTERY CHARGE LED situated next to the „J19” pins is on when the battery status
is being tested by the module and during charging of discharged battery. CA-10 tests the
presence of battery every 10 seconds and every 4 minutes it tests (for several seconds)
the battery status. During testing, the processor reduces the power supply and the loads
are powered from the battery. If the battery voltage drops down to 9.5 V, the control panel
will cut off the battery in order to prevent it from a complete discharge and damage.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel CA-10

Satel CA-10 Gebruiksaanwijzing - Nederlands - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 4 pagina's

Satel CA-10 Aanvulling / aanpassing - Deutsch - 64 pagina's

Satel CA-10 Aanvulling / aanpassing - Deutsch - 24 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 26 pagina's

Satel CA-10 Installatiehandleiding - Deutsch - 44 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Aanvulling / aanpassing - English - 60 pagina's

Satel CA-10 Aanvulling / aanpassing - English - 24 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 24 pagina's

Satel CA-10 Snelstart handleiding - English - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info