699577
17
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
CA-10 Installer Manual 15
The control panel power supply is fitted with:
battery status monitoring system with optional disconnection of discharged battery,
visual signaling of the battery testing/charging process (LED indicator on the main board),
changeover battery charging current (350 mA/700 mA).
The stabilized voltage of the control panel power supply is 13.6–13.8 V and is factory set.
Attention should be paid so as not to cause overloading of the control panel power supply in
the alarm system. It is advisable to make a load balance for the power supply. The total
current inputs for the consumers (detectors, keypads) and the battery charging current may
not exceed the power supply capacity. In case of a higher electric power demand,
an additional power supply can be used for some of the security system consumers
(e.g. APS-15, APS-30 manufactured by SATEL). Table 1 (at the end of this manual) shows
an example of estimated balance of current consumption by the system, and an example of
battery selection.
The CA-10 main board can be connected to an electric shock protection circuit (grounding).
The protective cable terminal is designated by the symbol.
The „neutral” wire of the 230 V AC mains supply must not be connected to the
grounding terminal. If the facility has no separate electric shock protection
circuit, this terminal must be left free.
The CA-10 control panel should be installed in an enclosed space with normal humidity of air.
The space should be fitted with an available permanent (not detachable) 230 V power supply
circuit with protective grounding.
The control panel can be mounted in the CA-10 OBU housing (this
housing comprises a transformer designed for operation with the
control panel power supply), which permits installation of a battery with
17 Ah capacity. Before the housing is secured to the base, it is
necessary to mount inside the housing plastic distance plugs, which are
intended for subsequent installation of the main board.
In case the plugs tend to slip out, the catches fixing the plug in the
housing need to be slightly bent aside (Figure 2). When inserting the
plug, press the central part of the head firmly in so that it is blocked in
the housing hole. It is advisable to make sure that the plug, when
pressed, does not slip out from the opening. During installation of the
housing, be careful so as not to damage the wires which will be passed
through the hole in its back panel.
When the housing is secured, you can install the control panel main board and proceed to
making the connections.
IMPORTANT: Do not connect the mains power supply and the battery, until all the remaining
connections are completed.
The control panel is power supplied from 230 V AC mains. Negligence or wrong
connection may result in electric shock and pose a threat to life!
Therefore, be particularly careful when hooking up the control panel. In the
process of installation and connection of the control panel, the cable to be used
for mains supply must not be alive!
Connection of keypads
The keypad is designed to operate indoors in normal humidity. It should be mounted straight
on a flat surface. The spring provided on the tamper contact must adhere to the base so that
the contact will open at an attempt to tear the keypad off the wall.
Figure 2.
PRESS IN
BEND ASIDE
BEND ASIDE
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel CA-10

Satel CA-10 Gebruiksaanwijzing - Nederlands - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 4 pagina's

Satel CA-10 Aanvulling / aanpassing - Deutsch - 64 pagina's

Satel CA-10 Aanvulling / aanpassing - Deutsch - 24 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 26 pagina's

Satel CA-10 Installatiehandleiding - Deutsch - 44 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Aanvulling / aanpassing - English - 60 pagina's

Satel CA-10 Aanvulling / aanpassing - English - 24 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 24 pagina's

Satel CA-10 Snelstart handleiding - English - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info