699577
14
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
12 Installer Manual SATEL
Operation with the computer can be realized in two ways: in the „local mode” by means of the
RS-232 port with RJ socket (after connecting the CA-10 directly to one of the computer COM
ports), or in the remote mode”, via the telephone line (in this case the computer must be
equipped with a modem).
Programming the data of LCD keypad is available in the local mode through the RS-232 port
on the keypad board. The DLOAD10 program, delivered with the panel, supports both
operating modes.
The DLOAD10 program enables:
downloading (reading) all control panel parameters,
uploading (writing) new parameters to the control panel,
downloading (reading) the system event log,
ON LINE operation.
The program does not read or change the user access codes these are only
accessible through the user functions from keypads.
In the ON LINE mode, the computer displays current information on the system state,
including zone violations, active outputs, control panel clock, and selected partition state.
Provision is made for controlling the system in the same way as with a LED keypad.
The computer screen keypad works in parallel with the real keypads in partitions, therefore
commands for all partitions can be given from one place. The ON LINE mode also permits
downloading troubles and programming the clock.
Communication in the local mode (through the RS-232 port) is started with a special service
function (FS112). Connection can also be initialized without using the keypad (e.g. if it is
located far from the control panel and the computer). This can be achieved using the "Local
connection with…" command in the DLOAD10 program.
Communication through the telephone line can be initialized in three modes:
1) The computer calls the control panel, which after answering the call exchanges
handshake signals with the computer. When they are correct, the panel confirms
acceptance of the remote programming command, hangs up and calls back to the
computer using a number preprogrammed in the control panel. Prior to calling the
computer back, the panel notifies the monitoring station that the programming has
started.
2) The computer calls the control panel and, after the handshake, the control panel
immediately proceeds to the exchange of data. This simplified mode of establishing
communication is reached when the computer telephone number is not entered in the
control panel. Notification of the monitoring station will take place after communication
with the computer is over.
3) Establishing of communication from the control panel by calling the user function 0
(zero). The control panel first notifies the monitoring station that the programming has
started (when monitoring is active), then it dials the computer telephone number.
In order to reduce the cost of telephone connections, multiple suspension of the transmission
is possible. At the next connection, the control panel does not inform the monitoring station of
remote programming. Only after receiving the command to end the communication,
a message on completing the remote programming is sent to the station.
Initialization of communication can be disabled from the computer. When the communication
is suspended from the computer, the control panel is waiting for a call from the computer for
four hours even when the functions of automatically answering the computer call are
disabled. When the communication is ended with the “end” command instead of “suspend”,
the information on ending the communication is entered into the event log and sent to the
monitoring station after four hours.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel CA-10

Satel CA-10 Gebruiksaanwijzing - Nederlands - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 4 pagina's

Satel CA-10 Aanvulling / aanpassing - Deutsch - 64 pagina's

Satel CA-10 Aanvulling / aanpassing - Deutsch - 24 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 26 pagina's

Satel CA-10 Installatiehandleiding - Deutsch - 44 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Aanvulling / aanpassing - English - 60 pagina's

Satel CA-10 Aanvulling / aanpassing - English - 24 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 24 pagina's

Satel CA-10 Snelstart handleiding - English - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info