699577
13
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
CA-10 Installer Manual 11
define how the events are to be sorted between the two stations. Information can be sent to
the stations in one of the seventeen transmission formats (including the TELIM format, used
in Germany).
Because of the analysis of commutation signals (algorithm ToneLOGIC), the CA-10 panel
controls the process of establishing connection with the station, which in case of the line
being frequently busy considerably reduces the time between occurrence of the event and
sending information to the monitoring station. As dialing retries are made immediately after
detecting the busy signal, the connection is established many times faster than with the
equipment which waits for one specific signal for a predetermined period of time and only
redials upon detecting that that signal has not occurred.
Dialer
The CA-10 control panel is equipped with a telephone dialer, which enables an alarm voice
message to be transmitted. The message is stored in an external synthesizer. The control
panel directly interfaces with the SM-2 voice synthesizer.
The dialer can also establish connections with paging systems. Four different alphanumeric
messages can be programmed.
The CA-10 allows programming of eight telephone numbers, 16 characters each.
It is possible to define for each number, which partitions signal alarm at that number and
assign to it one of the four text messages for the pager or a voice announcement from the
synthesizer.
During the procedure of connection setup, the ToneLOGIC system used in the CA-10 panel
controls sound signals from the telephone line. Hence, it can recognize that the call is
answered, irrespective of the type of telephone exchange.
Messaging for each telephone number is realized in accordance with the following
parameters:
number of queues (1 to 7) defines how many times it is necessary to call and send
information to each number,
maximum number of retries (1–9) number of attempts, after which the panel will stop
dialing the number, for which connection cannot be established (no answer, permanently
busy, etc.).
When waiting for the dial tone during dialing (code D, when the control panel is connected to
an extension line and is trying to get the outside line), detecting the busy signal does not
decrease the counter of queues and attempts.
The control panel dialer can also perform the function of answering the calls and
reporting the system state (service functions FS5 and FS101):
with a sound signal: one beep a second if there was no alarm,
with a voice message (if one hour has not elapsed yet after the alarm),
with a sound signal: five short beeps every second if at least one hour has elapsed from
the alarm.
Another way of getting information on the system state via the telephone is through the
control panel operation in conjunction with the SATEL MST-1 module (service function
FS131). Additionally, this module enables the system to be remotely controlled, within certain
limits, by means of DTMF signals. For the connection diagram refer to the MST-1 module
operating instructions.
Remote programming – DOWNLOADING
In order to facilitate programming, the CA-10 panel is equipped with a DOWNLOADING
function, which enables a PC computer to be used for programming and service control of
the alarm system.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel CA-10

Satel CA-10 Gebruiksaanwijzing - Nederlands - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 4 pagina's

Satel CA-10 Aanvulling / aanpassing - Deutsch - 64 pagina's

Satel CA-10 Aanvulling / aanpassing - Deutsch - 24 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 26 pagina's

Satel CA-10 Installatiehandleiding - Deutsch - 44 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Aanvulling / aanpassing - English - 60 pagina's

Satel CA-10 Aanvulling / aanpassing - English - 24 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 24 pagina's

Satel CA-10 Snelstart handleiding - English - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info