520094
68
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
Model menu
Aileron -> flap mixer
FX-40
18.3 AILERON -> FLAP MIXER
This menu is
used to set the
values for a
mixer which
causes the
spoiler flaps
(inboar
d flaps)
to move in the
s
ame direction
as the ailerons
when an aileron command is given. This mixer improves the
roll rate of a model glider, because the flaps deflect to support
the ailerons, thereby generating a greater roll moment. At the
same time the induced drag of the wing is reduced when the
model is turning.
The mixer rate can be adjusted in the usual way, but it is also
possible to set up a curve in order to obtain the exact control
surface travel you require. The function can be activated using
a switch which you can select; it can also be connected to
other mixers via a link (Link).
Mark the ‘Aileron ? flap’ mixer in the Model menu. The screen
now looks like this:
Start by activating this function in the ‘Status’ line using the
familiar method, then enter the mixer values for both flaps as
percentages using the arrow buttons in the standard way, in
each case for left and right aileron deflections. If you need to
reverse the direction of travel, this is achieved by changing the
prefix. The effects and method of setting the ‘Glob’ or ‘Sepa’
mode have already been described; the function is pro-
grammed using the appropriate switch field.
The adjustment range for both directions of travel for both
flaps is -120% to +120%; the default setting is 0%.
A switch can be defined to trigger the mixer, using the stan-
dard procedure. Mark the appropriate field, then define the
desired switch and its direction of operation in the switch
select menu which subsequently appears.
If you wish to link this mixer to another mixer, the appropriate
settings should be entered in the ‘Link’ line. You must first acti-
vate this option, then define the mixer to which a link is to be
created.
A mixer curve can also be defined and programmed as already
described several times. An ‘Offset’ and / or an ‘X-offset’ shift
can be implemented in the usual manner.
18.4 AILERON -> BRAKE FLAP MIXER
This menu is
used for setting
up a mixer
which causes
the brake flaps
to move in the
same direction
as the ailerons
when an aileron
command is
given. This mixer helps to improve the manoeuvrability of a
model aircraft around the longitudinal (roll) axis, because the
flaps deflect to support the ailerons, thereby generating a gre-
ater roll moment. At the same time the induced drag of the
wing is reduced when the model is turning.
The mixer rate can be adjusted in the usual way, but it is also
possible to set up a curve in order to obtain the exact control
surface travel you require. The function can be activated using
a switch which you can select; it can also be connected to
other mixers via a link (Link).
Mark the ‘Aileron -> brake flap’ mixer in the Model menu. The
screen now looks like this:
Start by activating this function in the ‘Status’ line using the
familiar method, then enter the mixer values for both brake
flaps as percentages using the arrow buttons in the standard
way, in each case for left and right aileron deflections. If you
need to reverse the direction of travel, this is achieved by
changing the prefix. The effects and method of setting the
‘Glob’ or ‘Sepa’ mode have already been described; the func-
tion is programmed using the appropriate switch field.
The adjustment range for both directions of travel for both
brake flaps is -120% to +120%; the default setting is 0%.
A switch can be defined to trigger the mixer, using the stan-
dard procedure: mark the appropriate field and define the des-
ired switch and its direction of operation in the switch select
menu which then appears.
If you wish to link this mixer to another mixer, the appropriate
settings should be entered in the ‘Link’ line. You must first acti-
vate this option, then define the mixer to which a link is to be
created.
A mixer curve can also be defined and programmed as pre-
viously described. An ‘Offset’ and / or an ‘X-offset’ shift can be
implemented in the usual manner.
67
Spoiler
(FLAP2)
Ailerons
(AIL2 and
AIL4)
Ailerons
(AIL and
AIL3)
Spoiler
(FLAP)
Brake
flap
(BRFL2)
Ailerons
(AIL2 and
AIL4)
Ailerons
(AIL and
AIL3)
Brake
flap
(BRFL)
68

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FX-40 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robbe Futaba FX-40

Robbe Futaba FX-40 Gebruiksaanwijzing - Deutsch - 105 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info