520094
67
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
Model menu
Wing flap settings
FX-40
This screen shot shows aileron differential programmed to
50%.
Select the ‘fine-tuning’ settings
It is possible to program a transmitter control to be used for
fine adjustments to the aileron dif
ferential settings (fine-
tuning); changes are carried out in the ‘Fine-tuning’ frame.
Mark the appropriate field and select your preferred trans-
mitter control in the transmitter control / switch select menu
which then appears.
The current curve for the fine-tuning option is also dis-
played on-screen.
66
18.2 WING FLAP SETTINGS
This menu is
used for ente-
ring the set-
tings for all the
inboar
d wing
flaps. If your
model featur
es
two pairs of
inboard flaps
(see diagram
above) this menu applies to the inboard brake flaps and spoi-
ler flaps, which are located adjacent to each other. The up and
down travel of each control surface can be set individually at
this point, while an Offset function allows you to fine-tune the
travels. As with many functions, it is also possible to determine
whether the settings are to apply to all flight modes (Glob) or
only to the currently activated flight mode (Sepa). If you wish,
you can program a mixer which causes the spoilers to be
deployed when the brake flaps are operated.
Mark the ‘Flap settings’ option in the Model menu. The screen
display now looks like this:
You can adjust the travel individually for each control surface
and each direction of movement, using the method already
described repeatedly in this manual. The same applies to the
Offset function; the value is simply entered as a percentage
using the arrow buttons.
The adjustment range for up-travel and down-travel is -120%
to +120% for both control surfaces; the default setting is
100%. The software automatically corrects the prefix for the
second wing flap if you reverse the prefix when programming
the travel of a paired control surface.
The effects and methods of setting the ‘Glob’ or ‘Sepa’ modes
have already been described; a corresponding button field is
assigned to each frame.
The brake flap mixer (BrFl -> flap) causes the spoiler flaps to
follow the movement when the brake flaps are deployed. The
mixer must first be activated in the ‘Status’ line, as already
described. ‘OFF’ or ‘ON’ will now be displayed in the corres-
ponding field, according to the position of the assigned
switch.
You can now select the appropriate switch fields and set the
mode of the flight modes in the time-honoured way; you can
also assign a switch, set the degree of following for each
direction of travel separately, and program an Offset.
Brake
flap
(BRK2)
Spoiler
(FLAP2)
Spoiler
(FLAP)
Brake
flap
(BRK1)
67

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FX-40 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robbe Futaba FX-40

Robbe Futaba FX-40 Gebruiksaanwijzing - Deutsch - 105 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info