490654
17
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
17
5.3 Wall mounting
There are two elongated holes on the back
of the BC 3 for mounting the charger to
a wall using two screws (e.g. round head
or at head screw with shank diameter of
5 mm).
Insert the two screws into the wall at a dis-
tance of 96 mm from one another and leave
the screw heads protruding approx. 4 mm.
6 Power tool settings
Setting must be done only when the pow-
er tool is turned off and will be accepted
only after restarting it.
6.1 Changing the direction
of rotation
The forward / reverse switch [1-3] changes
the direction of rotation.
Move switch from right to left = clockwise
rotation;
Move switch from left to right = anticlock-
wise rotation.
7 Tool holder,
attachments
Bit holder
The bit holder is used for fast replacement
of bits.
CAUTION
Risk of cutting injuries when chang-
ing the tool!
Wear protective gloves!
Bit holder assembly
Set the switch [1-4] into MAN position. Set
the bit holder [4-2] completely to the hex-
agonal spindle opening [4-4].
Attach bit into the holder [4-3].
Then attach the depth stopper on the gear
box as speci ed in point 8.2.
Bit holder disassembly
Remove the depth stopper as speci ed in
point 8.2. Use power to pull out the holder
from the spindle opening.
Bit replacement
You can use the depth stopper [1-5] for
the bit replacement [1-6]. Attach the depth
stopper on the bit (see gure [4 b]). By
means of jamming the depth stopper with
the bit and concurrent pulling, it is possible
to pull out the bit. Then attach a new bit
in the holder.
8 Operation
8.1 Switching on and off
The machine can be switched on by means
of several methods:
a) Set the forward / reverse switch [1-3]
into machine clockwise operation.
Set the switch [1-4] into MAN position. In
order to switch on the power tool, apply the
switch [1-2] and concurrently press the bit
on the screw.
Use the switch [1-2] to gradually regulate
the speed.
CAUTION
Pressing only the switch [1-2] does
not start the machine – it is not a ma-
chine fault!
CAUTION
Upon screwing to the required depth,
the power tool switches off!
b) Set the forward / reverse switch [1-3]
into machine clockwise operation.
Set the switch [1-4] into AUTO position.
Press the bit on the screw and the power
tool will switch on. Switch [1-2] does not
need to be pressed. Maximum speed is set
automatically.
CAUTION
Pressing only the switch [1-2] does
not start the power tool – it is not a
machine fault!
CAUTION
Upon screwing to the required depth,
the power tool switches off!
c) Set the forward / reverse switch [1-3]
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool DWC 18-2500 DEC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool DWC 18-2500 DEC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 10,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info