490654
16
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
16
LiIon battery packs, always use sand.
- Connecting the auto feed attachment and
drywall screwdriver results in a device,
which is subject to the safety regulations
and instruction for the drywall screw-
driver.
- Protect your eyes during use – pay due
care during overhead work!
- Use breathing protection, wear dust
mask!
4.3 Emission levels
Levels determined in accordance with
EN 60 745 are typically:
DWC 18-2500 DEC/18-4500 DEC
Sound pressure level L
PA
= 78 dB (A)
Noise level L
WA
= 89 dB (A)
Measuring uncertainty
allowance K = 3 dB
CAUTION
The noise produced during work may
damage your hearing.
Wear ear protection!
Overall vibration levels (vector sum for three
directions) measured in accordance with
EN 60 745:
DWC 18-2500 DEC
Vibration emission level
(3 directions) a
h
= 2.8 m/s
2
Uncertainty K = 1.5 m/s
2
DWC 18-4500 DEC
Vibration emission level
(3 directions) a
h
= 3.5 m/s
2
Uncertainty K = 1.5 m/s
2
The speci ed emissions values (vibration,
noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
loads during operation.
– They represent the primary applications
of the power tool.
Increase possible for other applications,
with other insertion tools or if not main-
tained adequately. Take note of idling and
downtimes of machine!
5 Commissioning
5.1 Changing the battery pack
Removing the battery pack
Press and hold the two buttons [2-2].
Slide the battery pack forwards to remove.
Inserting the battery pack
Slide the battery pack onto the retainer on
the underside of the handle shown in Fig. [3]
until it engages.
5.2 Charging the battery pack
The battery pack is delivered partially
charged. Charge the battery pack com-
pletely before using for the rst time.
To charge the battery pack, slide all the
way onto the retainer [2-1] on the charger.
To remove, slide the charged battery pack
from the charger in similar fashion.
The charger automatically detects the type
of the inserted battery (NiCd, NiMH or Li-
Ion).
A microprocessor controls the charging pro-
cess in line with the charging state, tem-
perature and voltage of the battery pack.
If a warm NiMH battery pack (> 37 °C) is
inserted, the pack is charged with a re-
duced charging current and will take longer
to charge.
The LED [3-2] on the charger indicates the
respective operating status of the charger.
LED yellow – lit continuously
Charger is ready to use.
LED green – ashing quickly
Battery pack is charged to maximum capa-
city.
LED green – ashing slowly
Battery pack is charged with reduced cur-
rent, LiIon is charged to 80 %.
LED green – lit continuously
Battery pack is fully charged, conservation
charging active.
LED red – lit continuously
Battery temperature is outside the permit-
ted range.
LED red – ashing
General fault display, e. g. incomplete con-
tact, short circuit, battery pack faulty, etc..
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool DWC 18-2500 DEC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool DWC 18-2500 DEC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 10,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info