490654
19
Verklein
Vergroot
Pagina terug
1/132
Pagina verder
19
9 Working instructions
The auto feed attachment must not be
held in the depth stopper area as there
are moving parts!
Each screw adjustment must be com-
pleted. Interrupted fastening or releasing
of the pressure during adjustment can
result in unsatisfactory machine function.
The collated screws and the auto feed
attachment can only be replaced when
the power tool is turned off.
Never use the auto feed attachment in
any other way than speci ed in this in-
struction manual.
Use only original screwing bits.
Use only original collated screws.
Always store the collated screws in origi-
nal packaging.
Always work in right angle against the
attached board.
Maintenance of the auto feed attach-
ment
The attachment generally does not require
any maintenance. After long period use, we
recommend to clean with pressurized air.
The auto feed attachment may be lubri-
cated in the area of the carriage guide (see
picture [12 b]).
Prior to cleaning, dismantle the attachment,
as speci ed above.
Prior to cleaning, remove the collated
screws from the attachment, as speci ed
in the point Removing the collated screws.
Pull the auto feed attachment from the dry-
wall screwdriver.
Disassembly of the slides
1. Push the depth stopper [9-2] into the
housing until the arresting button [12-1]
is at the level of the sign for dismantling
the slides [12-2] – see gure [12 a].
2. Press the arresting button [12-1] and
concurrently remove the slides from the
holder – see gure [12 b].
3. Press the orange button [9-1] and con-
currently release the depth stopper – see
gure [12 c].
Transport lever disassembly
1. Press the button [13-1] and concurrently
pull it out– see gure [13a].
2. Remove the released button [13-1] ( g-
ure [13 b]) with the transport lever [13-2]
and the spring [13-3] from the slides
( gure [13 c]).
Clean individual parts, replace defective or
worn parts, and assemble in the opposite
sequence.
CAUTION
During reassembly of the transport
lever into the slides, pay due care to
correct tting of the spring [13-3] in
the transport lever. Incorrect assem-
bly may result in dysfunction of the
belt transport.
Acoustic warning signal
Acoustic warning signals sound and the ma-
chine switches off in the following operating
states:
peep
- Battery at or machine
overloaded
Change the battery
pack.
Place the machine under
reduced stress.
peep peep
- Machine is overheating
You must allow the
machine to cool before
using again.
peep peep peep
- LiIon battery pack is
faulty or has overheated.
Once the battery pack
has cooled, perform a
functional check using
the charger.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool DWC 18-2500 DEC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool DWC 18-2500 DEC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 10,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info