675035
10
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
POWX07582 EN
Copyright © 2017 VARO P a g e | 10 www.varo.com
The mains voltage and the system frequency must conform to the voltage and frequency
that is indicated on the technical data sheet of the machine;
Fusing protection with a residual current device (RCD), with a sensitivity of 30 mA.
Sockets must be properly installed, earthed and tested.
Position a power cable in such a way that it does not hinder the work and cannot be
damaged.
Protect the power cable against heat, aggressive fluids and sharp edges.
Only use rubber-coated extension cables with a sufficient wire cross-section (3 x 1.5
mm²).
Do not use the power cable for pulling the plug out of the socket.
10 OPERATIONS
This saw can be used as a:
Cross-cut saw/ miter saw
Table saw
Before making any changes in the settings of this machine, always remove
the plug from the socket.
10.1 Cross-cut sawing mode
10.1.1 Safety instructions for the liftable saw blade guard (Fig. 3)
The liftable saw blade guard (C1) protects against accidental contact with the saw blade and
flying wood splinters.
The liftable saw blade guard must always return automatically to the start position, whenever
the saw head is lifted. The saw blade must be covered at all sides, when the saw head is
located in the start position.
10.1.2 Safety lock
The safety lock (6) blocks the saw head in the topmost position, and it prevents that the liftable
saw blade guard exposes the saw blade.
The safety lock is released by pushing on it. The saw head (19) can now be lowered; as the
saw head is lowered, the saw blade guard retracts and the saw blade is freed.
After a cut has been made, and when the saw head is back in the topmost starting position,
the liftable saw blade guard is once more blocked by the safety lock.
10.1.3 Installation
HAZARD!
Before starting with the installation of the machine:
Switch the machine “OFF”
Remove the plug from the socket
Wait until at the machine has come to a complete standstill
The upper saw blade guard (3) and the mitre and width guide (4) must be installed, so that
the saw blade can be covered and safely fastened. The mitre and width guide must
activate switch A (8); secure the position with the mitre guide locking knob (5).
Release the locking knob (22) and lift up the saw head completely
Remove the lower saw blade guard (14).
Use the switch (20) for activating the machine.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX07582 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX07582 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX07582

Powerplus POWX07582 Gebruiksaanwijzing - Nederlands - 22 pagina's

Powerplus POWX07582 Gebruiksaanwijzing - Deutsch - 22 pagina's

Powerplus POWX07582 Gebruiksaanwijzing - Français - 21 pagina's

Powerplus POWX07582 Aanvulling / aanpassing - Alle talen - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info