675035
12
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
POWX07582 EN
Copyright © 2017 VARO P a g e | 12 www.varo.com
Lower the saw head carefully and completely downwards while holding firmly onto the
handgrip. You should only apply medium pressure while sawing, so as to prevent that the
speed of the motor slows down.
Saw the workpiece in one single movement.
Carefully let the saw head return to its topmost starting position.
The saw should be switched off by releasing the switch (20), if no further sawing has to be
done.
Note: The mitre saw is activated at certain angles, such as at 0°, 15°, 22.5°,
30°, 45° and 60°.
10.1.6 Bevelling
During bevelling, the workpiece is sawn at an angle of less than 90°.
Starting position:
Saw head completely raised.
Motor head in the 0° position; the locking screw of the turntable is tightened.
10.1.7 Sawing the workpiece:
Release the bevelling locking knob (16) for tilting the saw head close to the saw.
Tilt the motor head carefully to the desired position.
Tighten up the bevelling lock knob (16).
Hold the workpiece against the mitre and width guide. If necessary, use a work clamp for
fastening the workpiece.
Activate the switch (20) and activate/push on the safety lock (6).
Lower the saw head carefully and completely downwards, while firmly holding onto the
handgrip. You should only apply medium pressure while sawing, so as to prevent that the
speed of the motor slows down.
Saw the workpiece in one single movement.
Carefully let the saw head return to its topmost starting position.
The saw should be switched off by releasing the switch (20), if no further sawing has to be
done.
10.1.8 Double mitre cut
A double mitre cut is a combination of a mitre cut and a bevelling cut; this means that the
workpiece is cut at an angle in the one single movement, which is not equal to 90° in
relation to the mitre and width guide and the material surface.
HAZARD! The saw blade is exposed much more than normally when
making a double mitre cut, which leads to an increased risk of injuries.
Always keep sufficient distance from the saw blade.
Starting position:
Saw head completely raised.
Mitre saw locked in the desired position.
Saw head tilted at the desired angle, in relation to the surface of the workpiece, and locked
in position.
10.1.9 Sawing the workpiece:
Hold the workpiece against the mitre and width guide. If possible, use a work clamp for
fastening the workpiece.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX07582 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX07582 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX07582

Powerplus POWX07582 Gebruiksaanwijzing - Nederlands - 22 pagina's

Powerplus POWX07582 Gebruiksaanwijzing - Deutsch - 22 pagina's

Powerplus POWX07582 Gebruiksaanwijzing - Français - 21 pagina's

Powerplus POWX07582 Aanvulling / aanpassing - Alle talen - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info