675035
11
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
POWX07582 EN
Copyright © 2017 VARO P a g e | 11 www.varo.com
HAZARD!
Before using the machine, always check that the following items function properly.
Liftable saw blade guard.
Wear protective clothing
Stand in the correct position for operating the machine
At the front of the saw
In front of the saw
To the side of the sawing line
Crushing hazard! Whenever you tip the sawing head to the side, you must have a firm grip
on the handle of the saw head, keep your fingers away from the support arm and out of
the tilting range! Hold the saw head firmly.
If required by the type of work you are doing, you must use the following accessories:
Workpiece support for long workpieces, which would otherwise fall off the table at the end
of the sawing process.
Dust collector
Use an additional guide, if small pieces have to be sawn.
Always hold of the workpiece firmly on the table and do not block it.
Do not try to stop the turning of the saw blade, by pressing the workpiece against the edge
of the saw blade. A risk of injuries can occur, if the saw blade is blocked.
10.1.4 Normal cross-cut operations
Starting position:
Saw head completely raised.
Turntable in the 0° position; the locking screw of the turntable is tightened.
The motor head stands in a vertical position (90°), and the bevelling lock knob is tightened.
Sawing the workpiece:
Hold the workpiece against the mitre and width guide; if possible use a work clamp (25) for
fastening down the workpiece.
Activate the switch (20) and activate/push on the safety lock (6).
Lower the saw head carefully and completely downwards while gripping the handgrip. To
prevent that the speed of the motor slows down, you should only apply medium pressure
while sawing.
Saw the workpiece in one single movement.
Carefully let the saw head return to its topmost starting position.
The saw should be switched off by releasing the switch (20), if no further sawing has to be
done.
10.1.5 Mitre sawing
During mitre sawing, the workpiece is sawed at an angle in relation to the mitre and width
guide.
Starting position:
Saw head completely raised.
The motor head stands in a vertical position (90°), and the bevelling lock knob is tightened.
Sawing the workpiece:
Release the mitre locking knob (9).
Set the desired angle.
Tighten the mitre locking knob once more.
Hold the workpiece against the mitre and width guide. If necessary, use a work clamp for
fastening the workpiece.
Activate the switch (20) and activate/push on the safety lock (6).
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX07582 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX07582 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX07582

Powerplus POWX07582 Gebruiksaanwijzing - Nederlands - 22 pagina's

Powerplus POWX07582 Gebruiksaanwijzing - Deutsch - 22 pagina's

Powerplus POWX07582 Gebruiksaanwijzing - Français - 21 pagina's

Powerplus POWX07582 Aanvulling / aanpassing - Alle talen - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info