683161
183
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Symptom Probable Cause Corrective Action Refer to
There is no TX output power.
The level of TX output power is low.
The microphone connector is not fully inserted. Insert the microphone connector fully. 1-2
The antenna connector is not properly
connected.
Connect the antenna properly.
2-6
The microphone gain level is turned down. Adjust the microphone gain. 4-8
The TX output power is set to the minimum
level.
Adjust the TX output power.
4-8
High-temperature protection is activated. End the transmission and allow the
temperature of this transceiver to go down.
The carrier level is low. Turn the [CAR] control on the Carrier Level
configuration screen until the pointer of the ALC
meter falls within the appropriate range.
5-8
The speech processor output level is low. Turn the [MIC/PITCH] control until the pointer
of the ALC meter falls within the appropriate
range.
8-4
The TX audio source used for transmission is
different from the input path of the TX audio
source input.
Check the input path of the TX audio to be
modulated. 8-1
Drive output (DRV) is enabled. Press [DRV] to switch off drive output. 4-11
The straight key or paddle is not correctly
connected.
Check the connection. 1-2
1-3
The transverter function is turned on. Press and hold [GENE] to cancel the
transverter function.
16-15
This transceiver is transmitting in a band (135
kHz or 475 kHz) that is not compatible with the
output from the antenna connector.
Press [DRV] to output from the DRV connector
(drive output). 16-15
There is no transmission.
The PWR meter is not displayed.
The [PTT] switch is locked while it is ON when
a desk microphone is used.
Turn off the PTT lock.
2-8
The frequency has deviated from the amateur
band.
Set the frequency to an amateur band.
4-3
TX Inhibit is ON. Configure TX Inhibit to “Off” in Menu [6-03]. 16-11
Significant background noise can be
heard when there is no sound during
transmission in the SSB and AM
modes.
Microphone gain is too high. Carry out audio transmission while monitoring
the ALC meter and adjust the microphone gain
such that a small amount of ALC voltage is
applied.
4-8
The input level setting of the speech processor
is high.
Turn the [MIC/PITCH] control until the pointer
of the COMP meter falls within the appropriate
range.
8-4
The VOX function is not functioning. The VOX gain setting is too low. Adjust the VOX gain. 8-1
The anti VOX gain setting is too high. Adjust the anti VOX gain. 8-2
Transmission starts by itself when this
transceiver is not operated.
The VOX function is ON or the VOX gain level
is not properly adjusted.
Set the VOX function to OFF or adjust the VOX
gain level.
8-1
The signal level of the TX audio source that is
input from the rear panel terminal is high.
Lower the level of the signal input.
Audio signal is input from a connector for which
the audio source setting of the TX audio is
enabled and the same audio source is also
specified for Data VOX.
Set Data VOX to OFF or review the audio
source setting before adjusting the VOX gain
level.
8-1
The receiving station has reported that
the audio sound is distorted or
clipped.
Microphone gain is high. Use the TX monitor function or adjust the
microphone gain while having the receiving
station monitor the transmission.
4-8
The input level of the speech processor is high. Use the TX monitor function or adjust the
speech processor input level while having the
receiving station monitor the transmission.
8-4
TROUBLESHOOTING 18
18-3
183

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info