683161
117
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Quick Memory Channels
Quick memory is a function that enables speedy registration of
temporary data without specifying a memory channel. For
example, this function is useful for registering the operating data
of the mobile station that this transceiver communicates with when
moving within a specific band to search for a DX station.
A quick memory channel can be called up only during operation in
the VFO mode. The following types of operating data can be
registered to a quick memory channel.
Frequency/mode of VFO A and VFO B
TX and RX functions
Status of the RIT function
Status of the XIT function
RIT/XIT frequency
Status of the FINE-tuning function
Status of the noise blanker
Noise reduction status
Status of the beat canceler
Status of the notch filter function
RX filter
Registering a Quick Memory Channel
Up to 10 quick memory channels (Q0 to Q9) can be registered on
this transceiver. The latest operating data that is registered is
assigned to “Q0”. Whenever operating data is newly registered,
the current registered data in “Q0” will be shifted to “Q1”, while the
newly-registered data will occupy the “Q0” channel.
Press [<Q-M.IN] to register the operating data to the
quick memory channel.
When in the VFO mode, pressing [<Q-M.IN] registers the
operating data to the channel 0.
When in the quick memory channel mode, pressing [<Q-
M.IN] registers the operating data to the selected quick
memory channel.
Each time new operating data is registered, the currently-
registered data will be shifted to the next larger channel
number.
When the memory channel mode is active, pressing [<Q-
M.IN] does not register data to a quick memory channel.
If all the quick memory channels are occupied with
registered data, pressing [<Q-M.IN] erases the oldest
operating data which is stored in the largest quick
memory channel number.
Calling up a Quick Memory Channel
Follow the steps below to call up a registered quick memory
channel.
1 Press [Q-MR>] to call up the operating data from the
quick memory channel.
Displays the quick memory channel number.
2 Turn the [MULTI/CH] control to switch the quick
memory channel.
Pressing [Q-MR>] again exits the quick memory channel
mode and returns the transceiver to the VFO mode.
When data is retrieved from a memory channel for use
or when operating data is not registered to the quick
memory channel, pressing [Q-MR>] does not call up the
quick memory channel.
Temporary changes can be made to the frequency and
other operating data without affecting the operating data
that is registered in the quick memory channel. To
register the operating data after changes are made,
press [<Q-M.IN] to register it to a quick memory.
Configuring the Number of Quick Memory Channels
This transceiver comes with 10 quick memory channels (Q0 to
Q9). However, it is possible to customize the number of quick
memory channels for registering data.
Configure in Menu [4-00] Number of Quick Memory
Channels
Setting Value 3/ 5 (default)/ 10 [ch]
When the number of quick memory channels is reduced
from a larger to a smaller number, registered data that
exceeds the smaller number of channels will be erased.
The preconfigured number of quick memory channels
cannot be changed when a quick memory channel is
being called up.
Erasing a Quick Memory Channel
Follow the steps below to erase all registered operating data from
the quick memory channels.
1 Press [Q-MR>] to call up a quick memory channel.
2 Press and hold [Q-MR>].
A message appears which prompts the user to confirm deletion
of all the operating data in the quick memory channels.
.
3 Press F4 [OK] to erase the operating data.
Operating data is erased from the quick memory channels
and the transceiver switches to the VFO mode.
Pressing F7 [CANCEL] clears the confirmation message
without erasing the operating data from the quick memory
channels.
MEMORY CHANNELS 9
9-5
117

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info