683161
116
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Configuring the Program Scan Frequency
Range
The frequency range for programmable VFO or program scan can
be registered to the memory channels from P0 to P9. Register the
start frequency and end frequency in advance to enable changes
to the frequency or scanning operation within a specific range.
For more details on program scan, please refer to Chapter 10.
1 When in the VFO mode, turn the Tuning or
[MULTI/CH] control to align the VFO frequency with
the frequency at which to start scanning.
2
Press [ M.IN] to display the Memory Channel List
screen.
3
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select the memory channel (P0 to P9) for
registering the frequency range.
4
Press F4 [M.IN] or [ M.IN] to register the start
frequency.
The start frequency is registered to “Frequency 1”.
5 Turn the Tuning or [MULTI/CH] control to align the
VFO frequency with the end frequency.
6
Press F4 [M.IN] or [ M.IN] to register the end
frequency.
The end frequency is registered to “Frequency 2” and the
transceiver exits the Memory Channel List screen.
Erasing Memory Channels
Data from a registered memory channel can be erased.
1 Press F7 [M.LIST] to display the Memory Channel
List screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a memory channel to be erased.
3 Press and hold F4 [(CLEAR)] to erase the operating
data.
When the operating data of a memory channel is erased
during operating in the memory channel mode, the
corresponding channel number will be maintained but
there will be no registered data inside.
To erase all the memory channels, perform memory
channel reset.
Registering a Memory Channel Name
Each memory channel can also be assigned with a name. The
name should contain not more than 10 characters (alphanumeric
characters and symbols).
1 Press F7 [M.LIST] to display the Memory Channel
List screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select the memory channel to be named.
3 Press F4 [NAME].
4 Use the function keys, [MULTI/CH] control or USB
keyboard to enter a name.
Enter a name that contains not more than 10 characters.
Key Behavior
F1 [SPACE] Inserts a space.
F2 [–]/ F3 [+] Selects a character.
F4 [ ]/ F5 [ ]
Moves the cursor.
F [BACK SPACE]
Deletes the character to the left of the
cursor.
F [DEL]
Deletes the character to the right of the
cursor.
F [CHAR]
Switches the type of character to edit.
Pressing the key each time switches the
selection in the following sequence:
ABC (upper case) → abc (lower case)
→ !”# (symbols) → ABC (upper case)
.
5 Press F6 [SAVE] to register the name.
Pressing F7 [CANCEL] returns the display to the Memory
Channel List screen without assigning a name to the
memory channel.
Characters that can be used are characters that can be
input using the keyboard selected in menu [9-01]
Keyboard Language (USB Keyboard).
Quick memory channels cannot be assigned with a
name.
Only memory channels that contain registered operating
data can be assigned a name.
9 MEMORY CHANNELS
9-4
116

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info