683161
115
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Changing the Memory Channel Temporarily
During operation in the memory channel mode, it is possible to
change the frequency and mode temporarily without affecting the
registered memory channel settings.
Changing the Frequency Temporarily
Follow the steps below to change the frequency temporarily.
1
Configure Menu [4-01] Temporary Change
(Memory Channel Configurations) to “On”.
Setting Value Off (default)/ On
2 Press [M/V] to switch to the memory channel mode.
3 Turn the Tuning control to alter the frequency.
To register a frequency that has been changed, store it in a
different memory channel.
For memory channels assigned to specific band
segments, changing the frequency or mode alters the
operating data that is registered in the corresponding
memory channel regardless of this setting.
Operating data related to the operating mode and FM
tone can be altered temporarily regardless of this setting.
Copying the Operating Data of a Memory
Channel
Operating data of a memory channel can be copied to a VFO or
another memory channel.
Memory Shift (Memory → VFO)
The operating data of a memory channel can be copied to a VFO.
It comes in handy when the frequency to use is near the frequency
registered in a memory channel.
Selecting a Memory Channel and Copying to VFO
1 Turn the [MULTI/CH] control in the memory channel
mode to select a memory channel.
2
Press and hold [M/V], or press F6 [M VFO] to copy
the operating data to the VFO.
The operating data of the selected memory channel is copied
to the VFO.
The transceiver exits the memory channel mode and enters
the VFO mode.
When the operating data is temporarily changed, the altered
operating data is copied to the VFO.
Operating data of memory channels assigned to specific
band segments cannot be copied to a VFO.
Operating data that is registered in “Frequency 1” is copied
to the VFO.
Performing memory shift of a split memory channel copies
the information of Frequency 1 to VFO A and that of
Frequency 2 to VFO B and switches the VFO mode to the
split state.
Copying Data from the Memory Channel List Screen
to VFO
1 Press F7 [M.LIST] to display the Memory Channel
List screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a memory channel.
3
Press and hold [M/V], or press F4 [M VFO] to copy
the operating data to the VFO.
After operating data is copied to a VFO, the data at the
source will be erased.
The transceiver exits the memory channel mode and enters
the VFO mode.
Operating data of memory channels assigned to specific
band segments cannot be copied to a VFO.
When in the VFO mode, operating data that is registered in
the memory channel selected on the Memory Channel List
screen is copied to the VFO.
Channel-to-Channel Copying
Operating data of a memory channel can also be copied to another
memory channel. This is useful in cases such as when sorting the
registered memory channels in a certain sequence.
1 Press F7 [M.LIST] to display the Memory Channel
List screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select the memory channel for which the
operating data is to be copied.
3 Press F6 [COPY] to copy the operating data.
The memory channel that is being copied changes into a
pink display.
4
Press F2[ ]/ F3[ ] or turn the [MULTI/CH]
control to select the memory channel for
registering the copied operating data.
5 Press F4 [M.IN] to end the process.
Operating data of the memory channel selected in step 2 is
copied to the memory channel selected in step 4.
Pressing F1 [CANCEL] or [ESC] ends the operation without
copying the operating data.
Operating data of the standard memory channels (00 to
99) and expanded memory channels (E0 to E9) cannot
be copied to memory channels assigned to specific band
segments (P0 to P9). The same applies to copying from
memory channels for specific band segments to
standard and expanded memory channels.
Operating data cannot be copied from memory channels
that are not registered with operating data.
MEMORY CHANNELS 9
9-3
115

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info