683161
119
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Scan is a function that searches for signals by automatically
altering the frequency. This transceiver makes use of the following
scan methods to search for signals.
Scan Type Purpose
Normal Scan
Program Scan
Performs scan in the frequency
ranges that are registered in the
memory channels for specific band
segments (P0 to P9).
VFO Scan
Performs scan on the entire RX
frequency band. When Program
Scan is set to OFF for all the
memory channels for specific band
segments, Program Scan switches
automatically to VFO Scan.
However, when VFO Scan is
selected, VFO Scan is performed
even when not all channels are set
to OFF.
Scan Using
Memory
Channels
All-Channel
Scan
Scans all Memory channels from 00
to 99, P0 to P9, and E0 to E9.
Group Scan
Scans the grouped memory
channels.
Quick Memory
Scan
Scans the Quick Memory channels.
Program Scan
Program Scan performs scan between the range specified by the
start and end frequencies which are registered in the each of
memory channels for specific band segments (P0 to P9).
Configure the frequency range for Program Scan in the memory
channels for specific band segments (P0 to P9). Up to 10
frequency ranges that are transmitted by specific stations can
be preconfigured. Enabling standby in a nearby frequency
makes it easy to perform tuning to a specific station when the
station starts communication in the preconfigured frequency
range.
Program Scan performs scan between the start and end
frequencies of a memory channel for specific band
segments and moves to the next channel after scanning
of the specified frequency range has ended.
While scanning is in progress, turning the Tuning or
[MULTI/CH] control allows the frequency to be changed
quickly. The same operation can also be used to change
the scanning direction.
Scanning is performed in the ascending order from low
to high frequency. Configuring the end frequency to a
value smaller than the start frequency by turning the
Tuning or [MULTI/CH] control reverses the scanning
direction (high to low frequency).
Scanning is performed based on the step frequency of
the Tuning control when in the SSB, CW, FSK and PSK
modes, while it is based on the step frequency of the
[MULTI/CH] control when in the FM mode, and fixed at
100 Hz in the AM mode.
Scanning stops when signals are received while
performing Program Scan (VFO Scan) in the FM mode
or during Memory Scan (All-channel Scan or Group
Scan) or Quick Memory Scan regardless of the operating
mode. For more information on the conditions to resume
scanning, please refer to Configuring the Conditions for
Resuming Scan” (10-4).
During standby for the CTCSS tone in the FM mode,
scan stops only when there is a matching CTCSS tone.
When the [SQL] control is turned to the right to a level
that far exceeds the squelch threshold while in the FM
mode, scanning may not stop even at a channel where
a signal is present. Configure the squelch level to a point
that is near the squelch threshold.
Starting the Program Scan (VFO Scan)
1 Press [M/V] to switch to VFO mode.
2 Press F5 [SCAN] to start program scan (VFO scan).
Pressing F5 [SCAN] again or [ESC] ends the Program Scan
(VFO Scan).
.
Configuring the Program Scan (VFO Scan)
Frequency Range
Scanning can be configured to the frequency range specified in
the memory channels for specific band segments (Program Scan)
or the entire RX frequency band (VFO Scan).
To perform Program Scan, register the memory channels for
specific band segments.
1 Press [M/V] to switch to VFO mode.
2 Press and hold F5 [SCAN] to display the VFO/
Program Scan configuration screen.
.
3 Press F5 [VFO/PROG] to display the Program Scan
segment screen.
4
Press F2 [ ]/ F3 [ ] to select a memory
channel for specific band segments.
5
Press F4 [ ] to select whether to scan the
memory channel for specific band segments.
Pressing F4 [ ] each time selects (performs scan) or
deselects (does not perform scan) the checkbox.
When performing VFO Scan, deselect the checkboxes for
all the memory channels for specific band segments or press
[VFO/PRG] to switch the display to VFO SCAN.
Pressing F6 [SEL.ALL] selects the checkboxes for all the
memory channels for specific band segments.
Pressing F7 [CLR.ALL] deselects the checkboxes for all the
memory channels for specific band segments.
6 Press [ESC] to end the process.
SCAN 10
10 SCAN
10-1
119

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info