683161
108
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Speech Processor
In the SSB mode, TX output power varies according to the
loudness of the audio from the transmitting transceiver, which may
sometimes cause audibility to deteriorate at the receiving
transceiver. A speech processor can be used in this case to
compress signals via digital signal processing to raise the average
power.
Similarly, using the speed processor in the AM or FM mode
stabilizes the degree of modulation regardless of the loudness of
the audio from the transmitting transceiver and helps to enhance
intelligibility.
.
Time
Speech
Processor
OFF
Amplitude Level
Time
Speech
Processor ON
Amplitude Level
Turning ON/OFF Speech Processor
1
Press the mode key to select either SSB, AM or FM
mode.
2
Press F [PROC].
Pressing F [PROC] each time toggles the speech processor
between ON and OFF.
When the speech processor is set to ON, PROC
OUT:nnn is displayed at the top of the screen. [nnn: 0 to
100]
The speech processor also functions with respect to
audio input from the ANI terminal of the ACC 2 connector
or the (USB-B) connector on the rear panel of this
transceiver.
Configuring the Speech Processor Input Level
1
Press and hold F [PROC] to display the Speech
Processor configuration screen
SSB/SSB-DATA/AM/AM-DATA Mode
.
FM/FM-DATA Mode
.
Switching the mode at the transmitting end to a non-
audio mode while the Speech Processor configuration
screen is displayed ends the Speech Processor
configuration screen.
2
Press F2 [ ]/ F3 [ ] to select “Input”.
3
Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to adjust the input level.
Setting Value 0 to 50 (default) to 100 (1 step)
4
Press and hold F [PROC] or press [ESC] to end the
process.
The speech processor input level is used to adjust the
input level of the mixed audio between the audio source
input configured for microphone gain and that configured
on the audio source input screen.
Switching the mode at the transmitting end to a non-
audio mode while the Speech Processor configuration
screen is displayed ends the Speech Processor
configuration screen.
Configuring the Speech Processor Output Level
1 Press and hold F [PROC] to display the Speech
Processor configuration screen.
2
Press F2 [ ]/ F3 [ ] to select “Output”.
“Output” is not displayed when the transmitting transceiver
is in the FM mode.
3 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to adjust the output level.
The output level can also be adjusted by turning the [MIC/
PITCH)] control.
Setting Value 0 to 50 (default) to 100 (1 step)
4 Press and hold F [PROC] or press [ESC] to end the
process.
Configuring the output to a level that is too high causes
distortion to occur in the TX signals and deterioration in
the radio wave quality as a result.
The speech processor output level is applied to both the
audio input from the microphone as well as the audio
source configured on the audio source input screen.
The speech processor output level is fixed and not
changeable in the FM mode.
Configuring the Speech Processor Effect
It is possible to configure how TX signals are to be processed by
the speech processor.
Press F6 [EFECT].
Pressing F6 [EFECT] each time switches the effect type.
Setting Value Soft (default)/ Hard
Hard: Places priority on raising the average power although
signals may remain distorted.
Soft: Places priority on reducing the level of distortion with minimal
effect on raising the average power.
The speech processor effect selected is the same in
each mode.
8 TRANSMIT FUNCTIONS
8-4
108

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info