683161
110
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Selecting a Frequency Characteristic for the TX
Equalizer
This transceiver comes with 6 types of frequency characteristics
for the TX equalizer. In addition, there are 3 other types that can
be customized according to the user’s preferences. A selection
can be made from these options.
1
Press and hold F [TX EQ] to display the TX Equalizer
screen.
.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/
CH] control to select a characteristic.
Make a selection based on the equalizer effects in the table
below.
Effects
Purpose
High Boost 1 (HB1)
Boosts the high frequency component. This is
effective for audio sound that contains a low
frequency component.
High Boost 2 (HB2)
Boosts the high frequency component. The low
frequency attenuation level for this option is half
of that of the HB1 option.
Formant Pass (FP)
This option attenuates frequency components
that is outside the audio bandwidth so that the
audio can be heard more clearly.
Bass Boost 1 (BB1)
Boosts the low frequency component. This is
effective for audio sound that contains a high
frequency component.
Bass Boost 2 (BB2)
Boosts the low frequency component. The low
frequency is further boosted compared to BB1.
Conventional (C)
Applies a 3 dB boost to the frequency range of
600 Hz or higher. This is suited for
communication that attenuates gradually as it
approaches the low frequency range.
User 1 (U1) Frequency characteristics can be adjusted
according to the user’ preferences and stored in
the options between User 1 and User 3. The flat
frequency characteristic is selected in the
default setting.
User 2 (U2)
User 3 (U3)
3
Press and hold F [TX EQ] or press [ESC] to end the
process.
.
TX Characteristic Curve
Frequency (Hz)
OFF
HB1
HB2
FP
BB1
BB2
C
0
5
-5
-10
-30
-25
-20
-15
10
10
0
10
3
10
2
10
1
Adjusting the TX Equalizer
The frequency characteristics of the TX equalizer can be adjusted
to produce the desired sound quality.
1
Press and hold F [TX EQ] to display the TX Equalizer
screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a characteristic.
3
Press F3 [ADJ] to display the TX Equalizer
Adjustment screen.
.
4
Press F3 [ ]/ F4 [ ] to select the frequency
band to adjust.
5
Press F5 [–]/ F6 [+] or turn the [MULTI/CH] control
to adjust the level of each frequency band.
Touching a point on the RX Equalizer Adjustment screen
selects the corresponding band and changes the frequency
to the selected level.
An alternative way is to touch a rough point followed by fine-
tuning in steps 3 and 4.
Pressing and holding F2 [(RESET)] resets all the frequency
levels to the default setting.
6
Press and hold F [TX EQ] or press [ESC] to end the
process.
Copying the TX Equalizer Settings
Equalizer effects that are configured according to the user’s
preferences can be copied and saved as user-defined settings.
1
Press and hold F [TX EQ] to display the TX Equalizer
screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a characteristic.
.
3
Press F5 [COPY].
A message with instructions on how to specify the destination
for saving the settings is displayed.
.
8 TRANSMIT FUNCTIONS
8-6
110

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info