683161
106
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Selecting Audio Source Input for Data VOX
The transmission status can be activated automatically when data
audio beyond a certain level is input from the ANI terminal of the
ACC 2 connector, (USB-A or USB-B) or LAN connector on
the rear panel of this transceiver in the SSB, FM or AM mode. This
function is known as Data VOX.
The audio source input that is activated with the Data VOX function
can be switched using the steps below.
1
Press and hold [DATA] to display the audio source
input screen.
2
Press F7 [D.VOX].
Pressing F7 [D.VOX] each time switches the Data VOX audio
source.
Setting Value Off (default)/ ACC 2/ USB Audio/ LAN
OFF, ACC 2, USB or LAN is displayed to the right of
“D.VOX” at the top of the screen.
3
Press and hold [DATA] or press [ESC] to end the
process.
If this transceiver is left connected to an audio source
such as a PC when Data VOX is configured to an audio
source input setting other than “OFF”, this transceiver
may be placed in the transmission state by the signals
from the audio source.
When this transceiver is to be left connected to the audio
source, set the Data VOX audio source input to OFF to
prevent transmission that is unintended.
Configuration Example
Transmission via PTT by modulating signals from MIC in the SSB
mode or transmission via DATA VOX by modulating signals from
a PC via USB Audio in the SSB-DATA mode.
Settings when DATA mode is OFF:
SEND/PTT Front: MIC, Rear: Off
DATA SEND (PF) Front: Off, Rear: USB Audio
DATA VOX: Off
Settings when DATA mode is ON:
SEND/PTT Front: MIC, Rear: Off
DATA SEND (PF) Front: Off, Rear: USB Audio
DATA VOX: USB Audio
Adjusting VOX Gain
VOX gain of the VOX function allows the VOX gain level to be
adjusted according to the loudness of the audio input from the MIC
connector or the noise in the surroundings.
VOX gain of the input data from the ANI terminal of the ACC 2
connector, (USB-A or USB-B) or LAN connector on the rear
panel of this transceiver can be adjusted in the Data VOX mode.
1
Press and hold [VOX] to display the VOX
configuration screen.
.
On the VOX configuration screen, the horizontal rows
represent the audio source input while the vertical columns
represent the setting item.
2
Press F2 [ ]/ F3 [ ] to select the audio source
input (horizontal row).
Select the audio source input row to adjust from “MIC”, “ACC
2”, “USB” and “LAN”.
3
Press F4 [ ]/ F5 [ ] to select the “VOX GAIN”.
4
Press F6 [–]/ F7 [+] or turn the [MULTI/CH] control
to adjust the VOX level.
Input signal from the audio source selected in step 2, and adjust
the level to activate transmission when audio signals are input.
Setting Value 0 to 10 (default) to 20 (1 step)
5
Press and hold [VOX] or press [ESC] to end the
process.
The VOX configuration screen ends when the transmitting
end is configured to a mode (non-audio mode) other than
SSB, AM and FM mode.
Adjusting the Anti VOX Gain Level
When the VOX function is ON, transmission may be activated by
the playback sound from the speaker in some cases in addition to
audio from the microphone. Speaker sound may be transmitted if
the speaker volume is configured to a high level. This function can
be used to prevent unintended transmission by configuring the anti
VOX level to adjust the lower limit for activating the VOX function
with respect to the playback sound from the speaker.
1
Press and hold [VOX] to display the VOX
configuration screen.
2
Press F2 [ ]/ F3 [ ] to select the audio source
input.
3
Press F4 [ ]/ F5 [ ] to select “ANTI VOX”.
4
Press F6 [–]/ F7 [+] or turn the [MULTI/CH] control
to adjust the sensitivity of the anti VOX gain.
Adjust the sensitivity of the anti VOX level so that transmission
will not be activated by the playback sound from the speaker.
Setting Value
0 to 20 (1 step)
The smaller the anti VOX gain value, the more susceptible
the transceiver is to playback sound from the speaker.
The default settings are as follows.
Microphone: 10
ACC 2: 0
USB: 0
LAN: 0
5
Press and hold [VOX] or press [ESC] to end the
process.
When a headphone is connected to the PHONES
connector, the VOX function (transmission) will not be
activated by the speaker audio regardless of the audio
source and anti VOX level settings.
Anti VOX gain applies to audio sources other than Data
VOX.
The speaker output level is compared with the ANTI VOX
level for any input line.
8 TRANSMIT FUNCTIONS
8-2
106

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info