683161
107
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Adjusting VOX Delay Time
During transmission of audio or data using the VOX function, the
transceiver may sometimes be restored to the receiving state, and
the end of the audio that is clipped off may not be transmitted as
a result. To prevent this from occurring, the delay time can be
adjusted to insert an appropriate pause before switching from the
transmitting to the receiving state.
1 Press and hold [VOX] to display the VOX
configuration screen.
2
Press F2 [ ]/ F3 [ ] to select the audio source
input (horizontal row).
Select the audio source input row to adjust from “MIC”, “ACC
2”, “USB” and “LAN”.
3
Press F4 [ ]/ F5 [ ] to select the “VOX DELAY”.
4 Press F6 [–]/ F7 [+] or turn the [MULTI/CH] control
to select the delay time.
Input signal from the audio source selected in step 2, and adjust
the delay time before returning to the receiving state after audio
input has ended.
Setting Value
0 to 10 (default) to 20 (1 step)
When “MIC” is selected, adjust the delay time while
speaking into the microphone.
The delay time for “MIC” can also be adjusted by turning the
[DELAY] control.
5 Press and hold [VOX] or press [ESC] to end the
process.
VOX Voice Delay
When the VOX function is ON, there may be a time lag before
transmission begins after voice input has started. For this reason,
the beginning part of the audio may be clipped off. To prevent this
phenomenon from occurring wherever possible, a VOX voice
delay time can be configured between the timing when
transmission is activated and before audio signals are sent out.
When using a microphone as the audio source input
for transmission:
Configure in Menu [6-13] VOX Voice Delay
(Microphone)
When using devices other than a microphone as the
audio source input for transmission:
Configure in Menu [6-14] VOX Voice Delay (Except
Microphone)
Setting Value Off/ Short/ Middle (default)/ Long
TX Monitor
TX audio can be monitored while transmission is in progress. This
is a convenient tool for checking the effect of the speech processor
or TX equalizer. In the FSK and PSK modes, FSK and PSK signals
transmitted by this transceiver can be monitored.
Press [MONI] to turn the TX monitor ON or OFF
The [MONI] LED lights up in green when the TX monitor is
turned on.
The ON/OFF status of the TX monitor and monitor level are
stored in the memory for each of the mode groups below.
During split operation, the mode at the transmitting end will
be monitored.
SSB/ FM/ AM
SSB-DATA/ FM-DATA/ AM-DATA
FSK/ PSK
Each time there is a change in the mode, the transceiver
switches back to the TX monitor ON/OFF status stored in
each group. TX monitor is always OFF in the CW mode.
Adjusting the TX Monitor Level
The volume level when monitoring the TX audio can be adjusted.
1 Press and hold [MONI] to display the TX Monitor
Level configuration screen.
.
2 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to select the TX monitor level.
Setting Value 0 to 10 (default) to 20 (1 step)
3 Press and hold [MONI] or press [ESC] to end the
process.
Feedback may occur when a speaker is used in the SSB,
AM or FM mode. Make use of a headphone instead.
Transmission of CW messages cannot be monitored
using the TX monitor. To monitor CW messages, make
use of CW sidetone.
In the FM, FSK and PSK modes, the audio of the TX
monitor may differ from the audio of the signal that is
actually transmitted.
TRANSMIT FUNCTIONS 8
8-3
107

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info