683161
93
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
NB2
NB2 is a function for blanking pulse noise with a long pulse width
which cannot be blanked by NB1. NB2 is further divided into Type
A and Type B, which can be employed according to the
circumstances. NB2 can also be used together with NB1.
Type A
.
Type A suppresses mainly the pulse noise
without blanking the target signal. The level
of the effect (Level) can be adjusted.
Type A
Target Signal
Pulse Noise
As pulse noise remains after blanking when “Type A” is
used, pulse noise might be audible when the target
signal is strong or when there is strong interference
within the passband. Even in such a situation, it has the
effect of bringing up the target signal when AGC gain is
low due to pulse noise.
“Type A” is most effective in cases where weak target
signals are buried in strong pulse noise.
Type B
.
Target Signal
Pulse Noise As with NB1, Type B blanks the pulse noise
together with target signal. The pulse
sensitivity level (Level), blanking duration
(Width) and attenuation level (Depth) can
be adjusted.
Type B
When pulse noise with a long pulse width is blanked using
“Type B”, the time interval for which the target signal is
removed becomes longer due to the long blanking time,
and this causes the silence period to stand out.
1 Press and hold [NB2] to display the Noise Blanker
2 configuration screen.
2 Press F6 [TYPE].
Pressing F6 [TYPE] each time toggles the screen between
“Type A” and “Type B”.
Type A Screen
.
Type B Screen
.
3 Press and hold [NB2] or press [ESC] to end the
process.
Pressing and holding [NB2] displays the noise blanker
2 screen which shows the current type in use.
The default setting is “Type A”.
Type selection can be configured separately for audio
mode (SSB/AM (including DATA mode)) and non-audio
mode (CW/FSK/PSK).
Configuring the NB2 Effect Level (Type A)/ NB2 Pulse
Sensitivity Level (Type B)
1 Press and hold [NB2] to display the Noise Blanker
2 configuration screen.
2 While the Type B screen is displayed, press F2
[ ]/ F3 [ ] to select “Level”.
3 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to change the level.
Setting Value 1 to 6 (default) to 10 (1 step)
Type A: Configuring to a larger value reduces the noise further.
Type B: Configuring to a larger value blanks pulse noises
with small level difference from the RX signal.
4 Press and hold [NB2] or press [ESC] to end the
process.
Configuring to a value with a higher level of noise blanker
effect may cause the transceiver to malfunction and
distort the RX audio depending on the condition of the
RX signal or interfering signal.
Configuring the Blanking Duration (Type B Only)
1 Press and hold [NB2] to display the Noise Blanker
2 configuration screen.
2 While the Type A screen is displayed, press F6
[TYPE] to switch to Type B.
3
Press F2 [ ]/ F3 [ ] to select “Width”.
4 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to change the blanking duration.
Setting Value 1 to 10 (default) to 20 (1 step)
Configuring to a larger value lengthens the blanking time.
5 Press and hold [NB2] or press [ESC] to end the
process.
Configuring the NB2 Attenuation Level (Type B Only)
1 Press and hold [NB2] to display the Noise Blanker
2 configuration screen.
2 While the Type A screen is displayed, press F6
[TYPE] to switch to Type B.
3
Press F2 [ ]/ F3 [ ] to select “Depth”.
4 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to change the attenuation level.
Setting Value 1 to 20 (default) (1 step)
Configuring to a larger value increases the attenuation level.
5 Press and hold [NB2] or press [ESC] to end the
process.
REJECTING INTERFERENCE 6
6-7
93

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info