683161
95
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Configuring the NR1 Effect Level
1 Press [NR] to select Noise Reduction 1.
2 Press and hold [NR] to display the Noise Reduction
1 effect level configuration screen.
.
3 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to change the level of effect.
Setting Value 1 to 5 (default) to 10 (1 step)
For NR1, configuring to a larger value reduces the noise
further. However, as the impact on the RX audio also gets
stronger if the effect level is excessively high, adjust it to an
appropriate level.
4 Press and hold [NR] or press [ESC] to end the
process.
Configuring the NR2 Correlation Time
1 Press [NR] to select Noise Reduction 2.
2 Press and hold [NR] to display the NR2 Time
Constant configuration screen.
.
3 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to change the correlation time.
Setting Value 2 to 20 (default) [ms] (2-step)
As the optimal correlation time varies with the RX signal and
noise type when NR2 is used, configure the correlation time
while receiving the signals.
4 Press and hold [NR] or press [ESC] to end the
process.
NR2 adjusts the correlation time for periodic signal
extraction. It is different from NR1, which adjusts the
effect level.
Beat Canceler
Beat canceler is capable of suppressing multiple periodic
interfering signals (beats) within the RX bandwidth through digital
processing at the AF level.
This function can be used in the SSB, AM and FM modes.
Turning ON/OFF Beat Canceler
Press [BC].
Pressing [BC] each time switches the beat canceler mode in
the following sequence: “Beat Canceler 1” “Beat Canceler 2”
→ “OFF”.
When beat canceler 1 or beat canceler 2 is ON, <<
BC 1
>>
or <<
BC 2
>> is displayed on the screen.
Beat canceler 1 suppresses weak beats and continuous
beats. Beat canceler 2 suppresses intermittent beats such
as CW signals.
.
Although the beat canceler suppresses the overall
auditory beat, the gain of the target signal cannot be
recovered using the AGC function. Thus, if the beat
signal is larger than the target signal, using a notch filter
activates the AGC function to enhance the clarity of the
target signal.
DSP Monitor
DSP monitor is a function for temporarily expanding the passband
width of the IF filter and AF filter via DSP in order to monitor the
signal condition of nearby frequencies such as when receiving a
specific frequency using a filter with a narrow passband width
during contesting.
Assigning DSP Monitor to PF Key
Register “DSP MONITOR” in Menu [0-15]
PF A: Key
Assignment to Menu [0-31] Microphone UP: Key
Assignment
Expanding the Passband Width Using DSP Monitor
Press and hold down the PF key that is assigned
with the DSP monitor function.
The passband width of the filter is expanded while the key is
held down.
During DSP monitoring, the audio peak filter is forcibly
turned OFF.
REJECTING INTERFERENCE 6
6-9
95

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info