683161
80
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
FFT Scope/Vectorscope Display Setting
The tuning scope displayed on the PSK communication screen
can be switched to an “FFT scope” or “vectorscope” display.
Configure in Menu [2-13] PSK Tuning Scope
Setting Value FFT Scope (default)/ Vector Scope
The display toggles between the “FFT scope” and “Vector
Scope” each time the scope display on the screen is touched.
FFT Scope Waveform Averaging
The waveform displayed on the FFT scope can be averaged.
Averaging of the waveform reduces random noise and makes
observation of the target signal easier.
Configure in Menu [2-10] FFT Scope Averaging
(PSK Decode)
Setting Value
0 (default) to 9 (1 step) (minimum to maximum
averaging)
Selecting a Waterfall Display Type
Configure in Menu [2-17] Waterfall when Tuning
(RTTY/PSK Audio Scope)
Setting Value Straight (default)/ Follow
Straight: Uses a straight line to show transition in the level of
the target signal displayed on the waterfall when the RX
frequency is altered.
Follow: Tracks and displays the latest FFT scope level at the
portion where the waterfall starts flowing when the RX
frequency is altered.
Vectorscope
Turn the Tuning control to perform tuning such that the emission
lines displayed on the vectorscope radiate from the center into the
same direction.
.
Unmodulated Carrier SignalIdle Signal of BPSK or QPSK
In Tune (QPSK)In Tune (BPSK)
Make use of the fine-tuning function if there is difficulty
in performing tuning.
While transmission is in progress, the vectorscope does
not function and points to the 12 o’clock direction.
AFC (Automatic Frequency Control)
The AFC (Automatic Frequency Control) function can be used to
tune the PSK signal that is being received.
Press F6 [AFC] to set the AFC function to “On”.
Pressing F6 [AFC] each time toggles the option in the
following sequence: “OFF” → “AFC ON” →“ AFC&NET ON”
→ “OFF”.
When the AFC function is ON, the << >> display lights
up. The amount of frequency correction made by the AFC
function is displayed below “AFC”.
Pressing and holding F6[AFC] while the AFC function is ON
increases or decreases the displayed frequency which
indicates the amount of correction made by the AFC
function.
.
Configuring the AFC Tuning Range
Configure the frequency range for tuning the PSK signals that are
received using the AFC function.
Configure in Menu [2-11]
PSK AFC Tuning Range
Setting Value ±8/ ±15 (default) [Hz]
NET
The NET function transmits signals by applying the frequency that
is automatically tuned by AFC.
Press F6 [AFC] to select “AFC & NET”.
Pressing F6 [AFC] each time toggles the option in the
following sequence: “OFF” → “AFC function ON” →“ AFC
function & NET function ON” → “OFF”.
<< >> and << >> light up.
.
Switching between BPSK and QPSK
The PSK mode is further divided into 2 sub-modes, namely BPSK
and QPSK. BPSK is the more commonly used mode. QPSK excels
at correcting errors and boasts a higher decoding rate than BPSK.
Press F2 [B/QPSK].
Pressing the key each time toggles the mode between BPSK
and QPSK. The display to the right of the status bar toggles
between << >> and << >> when the mode is
switched.
This is fixed at BPSK when the PSK63 mode is selected.
5 COMMUNICATING AIDS
5-24
80

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info