683161
82
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
PSK Message Memory
Fixed phrases that are often used in the PSK mode can be
registered in advance as a message in the message memory.
Adding the auto TX and auto RX functions to the fixed phrases
enables messages to be sent out via simple operation.
Up to 8 types of messages can be registered.
Registering Messages
1 Press F3 [DECODE] to display the PSK
communication screen.
2 Press F5 [MEMORY] to display the PSK Message
screen.
.
3
Press F3 [ ]/ F4 [ ] or turn the [MULTI/CH]
control to select the channel for registering the
message.
If F3 [
] and F4 [ ] are not displayed in the key guide,
press F2 [MORE] to toggle the key guide display.
4 Press F5 [MSG].
.
5 Use the function keys, [MULTI/CH] control or USB
keyboard to enter a character string.
Key Behavior
F1 [SPACE] Inserts a space.
F2 [–]/ F3 [+] Selects a character.
F4 [ ]/ F5 [ ]
Moves the cursor.
F [BACK SPACE]
Deletes the character to the left of the
cursor.
F [DEL]
Deletes the character to the right of the
cursor.
F [CHAR]
Switches the type of character to edit.
Pressing the key each time switches the
selection in the following sequence:
ABC (upper case) → abc (lower case)
→ !”# (symbols) → ABC (upper case)
Pressing F7 [CANCEL] discards the content that is currently
being edited and exits the character string input mode.
6 Press F6 [SAVE] to save the edited message.
Configuring Auto TX/RX for the PSK Message
Memory
The transmission and reception behavior can be configured when
a PSK message memory channel is selected.
Auto TX places this transceiver in the TX mode before
transmitting a message when a message memory channel is
selected, and maintain the TX mode after all messages have
been sent out.
For auto RX, pressing [F12] after selecting a message memory
channel for transmission places this transceiver in the TX mode.
When the message is sent out, this transceiver is automatically
restored to the RX mode.
Combining auto TX and auto RX enables both transmission and
reception to be performed automatically.
1 Press F3 [DECODE] to display the PSK
communication screen.
2 Press F5 [MEMORY] to display the PSK Message
screen.
3
Press F3[ ]/ F4[ ] or turn the [MULTI/CH]
control to select the channel containing the
message for auto TX/RX.
4 Press F6 [AUTO.TX] to set auto TX to ON.
<< >> is displayed to the right of the PSK message.
.
When auto TX is set to OFF, the << >> display
goes off, and the PSK message of the channel is temporarily
placed in the character string buffer but not transmitted
automatically.
5 Press F7 [AUTO.RX] to set auto RX to ON.
<< >> is displayed to the right of the PSK message.
When auto RX is set to OFF, the << >> display
goes off, and this transceiver is not restored to the RX mode
after the PSK message for the channel has been sent out.
To sent a PSK message for which “AUTO TX” is set to
ON, select the channel in which the PSK message is
stored. Check to ensure that the character string (PSK
message) is forwarded to the character string buffer,
followed by pressing [F12] on the USB keyboard.
To switch this transceiver to the RX mode after
transmitting a PSK message for which “AUTO RX” is set
to OFF, press [F12] on the USB keyboard after the PSK
message has been sent out.
5 COMMUNICATING AIDS
5-26
82

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info