683161
78
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Frequency Reverse in RTTY Mode
Decoding cannot be performed correctly when the RTTY signal
received is in the reverse state (frequencies of the mark signal and
space signal are reversed). When this occurs, press and hold
[FSK/ PSK] to reverse the RTTY signal received so that the
reverse signal can be decoded.
.
Space
Frequency
Mark
Frequency
BFOBFO
Mark
Frequency
Space
Frequency
170 Hz2125 Hz2125 Hz170 Hz
ReverseNormal
Operating RTTY (FSK) Using an External Device
To operate in the RTTY mode using a PC or other external devices
(such as RTTY device or PC connection interface) instead of the
built-in encoder and decoder functions of this transceiver while this
transceiver is configured to the RTTY (FSK) mode, connect using
the USB port or ACC 2 connector on the rear panel of this
transceiver.
When connecting to a PC (using the USB port)
RTTY keying: Configure the USB keying function to RTTY
Keying.
TX control: Use PC commands (TX; to start transmission
and RX; to end transmission). Or configure the USB keying
function to PTT.
Audio output: Select “USB AUDIO CODEC” for the recording
device using the sound setting on the PC.
For more details on the USB keying function, please refer to
USB Keying” (16-12).
When connecting to other external devices (using the
ACC 2 connector)
RTTY keying: Connect pin 2 (RTTY) of the ACC 2 connector
to the keying output line of the external device.
TX control: Connect pin 13 (SS) of the ACC 2 connector to
the TX control (PTT) line of the external device.
Audio output: Connect pin 3 (ANO) of the ACC 2 connector
to the demodulation input line of the external device.
* For more details on the ACC 2 connector, please refer to
ACC 2 Connector” (1-7).
For more details on other connections and settings, please refer
to “PC Connection for Data Communication” (1-4).
RTTY (FSK) Keying Polarity Setting
Configure in Menu [2-07]
FSK Keying Polarity
Setting Value Off (default)/ On
Configure the RTTY keying polarity according to the
specifications of the external device. When Menu [2-07]
FSK Keying Polarity is configured to “Off” and pin 2 (RTTY)
is short-circuited to GND, signals are transmitted at the mark
frequency configured in Menu [2-08] FSK Tone
Frequency.
When Menu [2-07] FSK Keying Polarity is configured to
“On”, signals are transmitted as space signals with the mark
frequency shifted by the amount configured in Menu [2-06]
FSK Spacing.
Audio Peak Filter
Using the audio peak filter may help to improve the decodability of
RTTY messages when operating in the RTTY (FSK) mode with
this transceiver connected to an external device.
Press F [APF] to set the audio peak filter to ON.
When audio peak filter is turned on, “ON” is displayed in the
lower row of F [APF].
When audio peak filter is turned off, “OFF” is displayed in the
lower row of F [APF].
PSK Operation
This transceiver is equipped with a built-in demodulator, encoder
and decoder for operating in the PSK31 and PSK63 modes.
Operation in the PSK31 or PSK63 mode can be performed easily
by connecting a commercially available USB keyboard. PSK can
also be operated using a data communication software program
that makes use of the sound function of a PC.
When transmitting in the PSK mode, adjust the carrier
until the ALC meter starts to deflect.
When an external device is used, adjust the audio signal
level from the external device, followed by adjusting the
ALC meter until it starts to deflect.
Displaying the PSK Communication Screen
1
Press [FSK/PSK] to select PSK mode.
2
Press F3 [DECODE].
The PSK communication screen appears.
Text Display Area + FFT Scope
.
Text Display Area + Vectorscope
.
Switching between the FFT Scope and Vectorscope Display
The display toggles between the “FFT scope” and “Vector Scope”
each time the scope display on the screen is touched.
Noise Reduction 1, Noise Reduction 2, Beat Canceler 1,
Beat Canceler 2 and RX DSP equalizer do not function
during decoding of PSK messages.
5 COMMUNICATING AIDS
5-22
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info