683161
79
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
The layout of the PSK communication screen is as follows.
.
Character String Buffer
Waterfall
Threshold Level
FFT ScopeIndicator TX/RX Details
Indicator
Indicates the status of the function.
TX/RX Details
Displays the character strings that are transmitted or received.
Character String Buffer
Character strings to be transmitted.
FFT Scope
The audio FFT scope is used for viewing the tuning status.
If there are multiple signals in the band, the target signal is tuned
such that it becomes a 1500 Hz tone.
Zero-in needs to be performed accurately in the PSK mode. Zero-
in the target signal while monitoring the FFT scope and
vectorscope.
Waterfall
Displays the transition in the spectrum of the TX audio signal in
tandem with the FFT scope.
Vectorscope
The vectorscope indicates the way in which the PSK signals
received are tuned. It comes in handy when tuning to the signal of
the target station while monitoring the waveform on the
vectorscope.
Threshold Level
Displays the threshold value of the RX signal input level for
decoding.
Operating the PSK Communication Screen
The following operations are enabled when the PSK
communication screen opens.
Pressing the [Page Up] or [Page Down] key scrolls the display
of the TX or RX details.
Key
Behavior
F1 [MORE] Switches the key guide.
F2 [B/QPSK] Switches between the BPSK and QPSK modes.
F3 [31/63] Switches between the PSK31 and PSK63 modes.
F3 [PAUSE]
Pauses update (drawing) of the TX/RX details display
area. Pressing the key again resumes the update
(drawing).
F4 [LOG]
Turns ON/OFF the communication log function.
Pressing and holding this key displays the screen for
selecting a log file that is saved.
F4 [(CLEAR)]
Pressing and holding the key clears the text displayed
on the TX/RX details screen.
F5 [THLD] Switches to the threshold level configuration mode.
F5 [MEMORY] Switches to the PSK Message screen.
F6 [AFC] Switches the AFC function.
F7 [EXTEND]
Enlarges the size of the PSK communication screen.
Pressing it again restores the screen to the standard
size.
Indicator Displays
Display Behavior
.
Appears when the communication log function is ON.
.
Appears when the communication log function is ON
and in the standby mode.
.
Appears when signal decoding is in progress.
.
Appears when encoding the character strings in the
TX character string buffer.
.
Appears when the decode function is stopped or
disabled.
.
Appears when transmitting the auto standby channel
during transmission of the message memory.
.
.
Displays the baud rate.
.
.
Displays the communication mode.
.
Appears when in the insert mode.
.
Appears when in the overwrite mode.
.
Appears when AFC is ON.
Displays the difference in frequency at the bottom.
.
Appears when NET is ON.
Saving PSK Communication Logs
The CW, RTTY and PSK communication screens can be saved
using the communication log function. Please refer to
“Communication Log” on page 5-27.
Adjusting the PSK Decode Threshold Level
Noise that occurs when there is no signal may sometimes be
erroneously detected as text, which results in the display of
unwanted text. To reduce the occurrence of such issues, adjust
the threshold level. Raise the threshold level when there is
frequent erroneous detection due to noise.
1 Press F5 [THLD].
The threshold level setting can now be adjusted.
.
2 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to adjust the level.
Setting Value 1 to 10 (default) to 30 (1 step)
Adjust the threshold value in the ascending order according
to the receiving status of noise, for example. Start from a
small value between the range of 1 to 30 and configure the
threshold value to a point where reception is good.
3
Press F1 [ ] to end the process.
COMMUNICATING AIDS 5
5-23
79

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info