683161
77
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Transmitting Character Strings from the RTTY
Message Memory
A message that is registered in the RTTY message memory can
be transmitted as follows.
1 Press F5 [MEMORY] to display the RTTY Message
screen.
.
2 Press F3 [CH 1] to F6 [CH 4] or F3 [CH 5] to F6 [CH
8] to select the channel that contains the message
to be transmitted.
The RTTY message of the channel corresponding to the
function key is being transmitted automatically.
If the channel guide is not displayed, press F2 [MORE].
Pressing F7 [NEXT] each time switches between F3 [CH
1] to F6 [CH 4] and F3 [CH 5] to F6 [CH 8].
After transmitting the RTTY message that is indicated by an
<<
>> display beside it, this transceiver returns
to the RX mode.
Settings Related to RTTY Encode/Decode
Enabling Decode UOS (Unshift on Space)
If a space character is included in the RTTY signal that is received,
the character following the space can be forcibly interpreted as a
character code (alphabet).
In RTTY, garbled characters may appear due to the signal strength
or noise. To avoid this from happening as much as possible, the
character after a space character is interpreted as a more
frequently used character code (alphabet).
Configure in Menu [2-01]
RX UOS
Setting Value Off/ On (default)
On: Encodes space characters.
Off: Does not encode space characters.
To receive a numeric value or symbol that immediately
follows a space character, turn off the UOS function.
Newline Code Setting
Configure the newline code when receiving an RTTY signal.
Configure in Menu [2-02]
Newline Code
Setting Value CR+LF/ All (default)
All: Inserts a line break for every newline code.
CR+LF: Inserts a line break only when a CR+LF code is
received.
Diddle Operation
Diddle allows the user to select the type of code to transmit when
the characters to be sent run out during transmission in the RTTY
(FSK) mode.
Configure in Menu [2-03] Diddle
Setting Value Off/ Blank Code (default)/ Letters Code
Off: Does not send out a character code.
Blank Code: Sends out a space character.
Letters Code: Sends out a character code.
Encode UOS
This is used for sending out a numeric value or symbol that
immediately follows a space during transmission in the RTTY
(FSK) mode. Enabling this function allows the receiving station to
recognize the code that comes after a space as a numeric value
or symbol, thus reducing the occurrence of garbled characters.
Configure in Menu [2-04] TX UOS
Setting Value Off/ On (default)
On: Uses encode UOS.
Off: Does not use encode UOS.
Sending a Newline Code at the Start or End of a
Transmission
A newline code (CR+LF) can be sent out when RTTY encode/
decode starts or ends. A line break is inserted before and after the
RTTY message on the decode screen of the receiving station,
which makes it easier to identify the transmitted RTTY message.
Configure in Menu [2-05] Automatic Newline Insertion
Setting Value Off/ On (default)
On: Sends out a newline code.
Off: Does not send out a newline code.
RTTY Parameters
Configuring the Mark Frequency
Configure the frequency of the mark signal that is used for
communication in the RTTY (FSK) mode. The 1275 Hz frequency is
referred to as a low tone, and the 2125 Hz frequency as a high tone.
The high tone is used under normal circumstances.
Configure in Menu [2-08]
FSK Tone Frequency
Setting Value 1275/ 2125 (default) [Hz]
Configuring the RTTY Shift Width
The difference between the mark signal frequency and space
signal frequency is called shift width. Configure the shift width
during communication in the RTTY mode.
Configure in Menu [2-06]
FSK Spacing
Setting Value 170 (default)/ 200/ 425/ 850 [Hz]
RTTY shift width cannot be altered when the RTTY
communication screen is open.
When the shift width in RTTY exceeds 170 Hz, the audio
peak filter for the selected band cannot be set to ON.
To operate in the RTTY mode using the built-in
demodulator, encoder and decoder of this transceiver,
configure the setting to “170 [Hz]”.
COMMUNICATING AIDS 5
5-21
77

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info