776259
20
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
20 GMC-I Messtechnik GmbH
7.2 Special Tests for Systems and RCDs
7.2.1 Testing Systems and RCCBs
with Rising Residual Current (AC)
for Type AC, A/F, B/B+ and EV, MI RCDs
Measuring Method
The instrument generates a continuously rising residual current of
(0.3 ... 1.3) IΔN within the system for the testing of RCDs.
The instrument stores the touch voltage and tripping current val-
ues which were measured at the moment tripping of the RCCB
occurred, and displays them.
One of the touch voltage limit values, UL=25V or U
L=50/65V,
can be selected for measurement with rising residual current.
Select the Measuring Function
Connection
Setting Parameters for IF
Start Measurement
Measuring Sequence
After the measuring sequence has been started, the test current
generated by the instrument is continuously increased starting at
0.3 times nominal residual current, until the RCCB is tripped. This
can be observed by viewing gradual filling of the triangle at IΔ.
If touch voltage reaches the selected limit value (UL=65V, 50V
or 25 V) before the RCCB is tripped, safety shut-down occurs.
The LIMIT LED lights up red.
Note
Safety Shut-down: At up to 70 V, a safety shut-down is
tripped within 3 seconds in accordance with IEC 61010.
If the RCCB is not tripped before the rising current reaches nomi-
nal residual current IΔN, the LIMIT LED lights up red.
Attention!
!
If bias current is present within the system during mea-
surement, it’s superimposed onto the residual current
which is generated by the instrument and influences
measured values for touch voltage and tripping current.
See also section 7.1.
Evaluation
According to DIN VDE 0100-600, rising residual current must,
however, be used for measurements in the evaluation of RCDs,
and touch voltage at nominal residual current IΔN must be calcu-
lated from the measured values.
The faster, more simple measuring method should thus be taken
advantage of (see section 7.1).
7.2.2 Testing Systems and RCCBs with Rising Residual Current
(AC) for Type B/B+ and EV, MI RCDs
In accordance with VDE 0413-6, it must be substantiated that,
with smooth direct current, residual operating current is no more
than twice the value of rated residual current IΔN. A continuously
rising direct current, beginning with 0.2 times rated residual cur-
rent IΔN, must be applied to this end. If current rise is linear, rising
current may not exceed twice the value of IΔN within a period of 5
seconds.
Testing with smoothed direct current must be possible in both
test current directions.
IF
Nom. res. current:
10 ... 500 mA
Type 1:
RCD, SRCD, PRCD etc.
Nominal current: 6 ... 125 A
Type 2: AC , A/F , B/B+ *,
EV/MI, EV/MI
* Type B/B+/EV/MI =
AC/DC sensitive
Waveform:
Positive direct current
negative half-wave
positive half-wave
Touch voltage:
Tripping limit values:
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt Profitest Intro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt Profitest Intro in de taal/talen: Engels als bijlage per email.

De handleiding is 1.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info