776259
22
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
22 GMC-I Messtechnik GmbH
7.3 Testing of Special RCDs
7.3.1 Systems with Type RCD-S Selective RCCBs
Selective RCCBs are used in systems which include two series
connected RCCBs that are not tripped simultaneously in the
event of a fault. These selective RCCBs demonstrate delayed
response characteristics and are identified with the symbol.
Measuring Method
The same measuring method is used as for standard RCCBs (see
sections 7.1 on page 18 and 7.2.1 on page 20).
If selective RCCBs are used, earthing resistance may not exceed
half of the value for standard RCCBs.
For this reason, the instrument displays twice the measured value
for touch voltage.
Select the Measuring Function
Set Parameter – Selective
Start Measurement
Tripping Test
Press the IΔN key. The RCCB is tripped. Blinking bars appear
at the display panel, after which time to trip tA and earthing re-
sistance RE are displayed.
The tripping test need
only be performed at
one measuring point for
each RCCB.
Note
Selective RCCBs demonstrate delayed response charac-
teristics. Tripping performance is briefly influenced (up to
30 s) due to pre-loading during measurement of touch
voltage. In order to eliminate pre-charging caused by the
measurement of touch voltage, a waiting period must be
observed prior to the tripping test. After the measuring
sequence has been started (tripping test), blinking bars
are displayed for approximately 30 seconds. Tripping
times of up to 1000 ms are allowable. The tripping test is
executed immediately after once again pressing the IΔN
key.
7.3.2 PRCDs with Non-Linear Type PRCD-K Elements
The PRCD-K is a portable RCD with electronic residual current
evaluation laid out as an inline device which switches all poles (L,
N and PE). Undervoltage tripping and protective conductor moni-
toring are additionally integrated into the PRCD-K.
The PRCD-K is equipped with undervoltage tripping, for which
reason it has to be operated with line voltage, and measurements
may only be performed in the on state (the PRCD-K switches all
poles).
Terminology (from DIN VDE 0661)
Portable protective devices are circuit breakers which can be con-
nected between power consuming devices and permanently
installed electrical outlets by means of standardized plug-and-
socket devices.
A reusable, portable protective device is a protective device which
is designed such that it can be connected to movable cables.
Please be aware that a non-linear element is usually integrated
into PRCDs, which leads to immediate exceeding of the greatest
allowable touch voltage during UIΔ measurements (UIΔ greater
than 50 V).
PRCDs which do not include a non-linear element in the protec-
tive conductor must be tested in accordance with section 7.3.3
on page 23.
Objective (from DIN VDE 0661)
Portable residual current devices (PRCDs) serve to protect per-
sons and property. They allow for the attainment of increased lev-
els of protection as provided by protective measures utilized in
electrical systems for the prevention of electrical shock as defined
in DIN VDE 0100-410. They are to be designed such that they
can be installed by means of a plug attached directly to the pro-
tective device, or by means of a plug with a short cable.
S
IΔN
Or
IF
Type 1:
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt Profitest Intro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt Profitest Intro in de taal/talen: Engels als bijlage per email.

De handleiding is 1.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info