776259
18
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
18 GMC-I Messtechnik GmbH
Test Standard
The following must be substantiated per
DIN VDE 0100-600:2008:
Touch voltage occurring at nominal residual current may not
exceed the maximum allowable value for the system.
Tripping of the RCCB must occur within 400 ms (1000 ms for
selective RCDs) at nominal residual current.
Important Notes
•The PROFITEST INTRO permits simple measurements at all
types of RCDs. Select RCD, SRCD, PRCD etc.
Measurement must be executed at one point only per RCD
(RCCB) within the connected electrical circuits. Low-resis-
tance continuity must be substantiated for the protective con-
ductor at all other connections within the electrical circuit (RLO
or UB).
The measuring instruments often display 0.1 V touch voltage
in TN systems due to low protective conductor resistance.
Be aware of any bias currents within the system. These may
cause tripping of the RCDs during measurement of touch volt-
age UB, or may result in erroneous displays for measurements
with rising current: Display = IF
- Ibias_current
Selective RCDs identified with an can be used as the sole
means of protection for automatic shutdown if they adhere to
the same shutdown conditions as non-selective RCDs (i.e.
ta< 400 ms). This can be substantiated by measuring break-
ing time.
Type B RCDs may not be connected in series with type A or F
RCDs.
Note
Bias Magnetization
Suppression of RCD tripping by means of bias magneti-
zation with direct current is only possible via a country-
specific measuring adapter, e.g. PRO-Schuko measuring
adapter (Z503K) or the KS-PROFITEST INTRO (Z503L) for
3-pole measurement.
7.1 Measuring Touch Voltage (with reference to nominal resid-
ual current) with 1/3 Nominal Residual Current and Tripping
Test with Nominal Residual Current
Select the Measuring Function
Connection
Setting Parameters for IΔN
S
IΔN
Nom. res. current:
10 ... 500 mA
Type 1:
RCD, SRCD, PRCD etc.
Nominal current: 6 ... 125 A
Type 2: AC , A/F ,
B/B+ *, EV/MI
* Type B/B+/EV/
MI
=
AC/DC sensitive
Phase displacement: 0°/180°
X times tripping current
Negative/positive half-wave
Positive direct current
1, 2, 5 (IΔN max. 300 mA)
Waveform:
Touch voltage:
Time to trip:
< 25 V, < 50 V, < 65 V
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt Profitest Intro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt Profitest Intro in de taal/talen: Engels als bijlage per email.

De handleiding is 1.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info