776259
17
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
GMC-I Messtechnik GmbH 17
6.2 3-Phase Measurement (line-to-line voltage) and Phase
Sequence
Connection
The measuring adapter
(2-pole) is required in
order to connect the
instrument, and is
expanded to a 3-pole
measuring adapter with
the included measure-
ment cable.
Press softkey U3~.
A clockwise phase
sequence is required at all 3-phase electrical outlets.
Measurement instrument connection is usually problematic
with CEE outlets due to contact problems.
Measurements can be executed quickly and reliably without
contact problems with the help of the Z500A variable plug
adapter set available from GMC.
Connection for 3-wire measurement: L1-L2-L3 at plug in
clockwise direction as of PE socket
Direction of rotation is indicated by means of the following dis-
plays:
Note
See section 16 regarding all indications for the mains
connection test.
Voltage polarity
If the installation of single-pole switches to the neutral conductor
is prohibited by the standards, voltage polarity must be tested in
order to assure that all existing single-pole switches are installed
to the phase conductors.
7 Testing RCDs
Testing of residual current devices (RCDs) includes:
Visual inspection
•Testing
Measurement
Use the test instrument for testing and measurement.
Measuring Method
The following must be substantiated by generating a fault current
downstream from the RCD:
That the RCD is tripped no later than upon reaching
its nominal fault current value
That continuously allowable touch voltage value
UL agreed upon for the respective system is not exceeded
This is achieved by means of:
Touch voltage measurement,
10 measurements with full-waves and extrapolation of IΔN
Substantiation of tripping within 400 ms or 200 ms with IΔN
Substantiation of tripping current with rising residual current
This value must be between 50% and 100% of IΔN (usually
about 70%).
No premature tripping with the test instrument, because test-
ing is begun with 30% residual current (if no bias current
occurs within the system)
Clockwise Counterclockwise
RCD/FI
Table
Differential
Current Waveform
Correct RCD/RCCB Function
Type AC Type A/F
Type B/B+ Type EV/MI
Alternating
current
Suddenly occurring
✔✔✔
Slowly rising
Pulsating
direct current
Suddenly occurring
✔✔
Slowly rising
Direct
current ✔✔
Direct
current
up to 6 mA
IΔN
3
--------
IΔN (measurement for up to 1000 ms)
ta
Ia
t
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt Profitest Intro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt Profitest Intro in de taal/talen: Engels als bijlage per email.

De handleiding is 1.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info