763696
15
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
15
EN
Before proceeding to your job, read the
section “Sefety Instructions”. It is
recommended to first practice sawing
easy logs. This also helps you get
accustomed to your unit.
Always follow the safety regulations. The
chain saw must only be used for cutting
wood. It is forbidden to cut other types
of material. Vibrations and kickback vary
with different materials and the
requirements of the safety regulations
would not be respected.
Do not use the chain saw as a lever for
lifting, moving or splitting objects. Do not
lock it over fixed stands. It is forbidden to
hitch tools or applications to the PTO
other than those specified by the
manufacturer.
It is not necessary to force the saw into
the cut. Apply only light pressure while
running the engine at full throttle.
When the saw chain is caught in the cut,
do not attempt to pull it out by force, but
use a wedge or a lever to open the way.
This saw is equipped with a chain brake
that will stop the chain in the event of
kickback if operating prop¬erly. You
must check the chain brake operation
before each usage by run¬ning the saw
at full the throttle for I ¬2 seconds and
pushing the front hand guard forward.
The chain should stop immediately with
the engine at full speed. If the chain is
slow to stop or does not stop, replace
the brake band and clutch drum before
use.
It is extremely important that the chain
brake be checked for proper operation
before each use and that the chain be
sharp in order to maintain the kickback
safety level of this saw. Removal of the
safety devices, inadequate maintenance,
or incorrect replacement of the bar or
chain may increase the risk to serious
personal injury due to kickback.
General guidelines for felling trees
Never cut with the nose of the guide bar.
Danger of kickback.
Felling can start only under the condition
that an escape route from the felling tree
is provided.
When you fell a tree, be sure to warn
neighboring workers of the danger.
Never cut a tree during winds.
Always ensure your foothold. Do not
stand on the log.
Be alert to the rolling over of a cut log.
Especially when working on a slope,
stand on the uphill side of the log.
Follow the instructions in “Safety
Instructions” to avoid kickback of the
saw.
In the area of felling trees, there must not be
any other persons or animals.
The safety distance from the tree being felled
is minimally 2½ x the length of the tree.
The direction of the fall is controlled by the
notching cut.
The escape route should lead ca 45° obliquely
back.
For the direction of the tree fall, these factors
are also important:
- Natural lean of the tree,
- Height of the tree,
- Large amount of branches,
- Location on flat land or slope,
- Asymmetric growth, damaged wood,
- Direction and velocity of air,
- Snow on the branches.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ferm CSM1045 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ferm CSM1045 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info