723580
8
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
ENGLISH
6
Fig. D
13 16
Two-Stage Clutch/E-ClutchTM (Fig. E)
NOTICE: Always turn the tool off before changing
torque control settings or damage to tool mayresult.
Two-stage clutch
D25603, D25651
Clutch Setting 1 14  is designed for most hammerdrilling
applications and is designed to easily clutch out when the
drill bit encounters re-bar or other foreignsubstances.
Clutch Setting 2 11  is designed for higher torque
applications such as core-bits and deep hole hammerdrilling
and is designed to clutch out at a higher torquethreshold.
Move the torque control lever 8  to Clutch Setting 1 or 2 as
needed forapplication.
NOTE: Allow the motor housing to rotate a little while
changingtorque.
NOTE: If it is not possible to select Clutch Setting 2, run the
unit under load and tryagain.
Each time the tool is plugged in, it will automatically default
to Clutch Setting 1, the most sensitivesetting.
E-CLUTCH™
D25603
In addition, E-Clutch™ offers increased user comfort and
safety through an on-board antirotation technology capable
of detecting if the user loses control of the hammer. When a
jam is detected, the torque and speed are reduced instantly.
The red indicator LED 9  illuminates when the E-Clutch™
isengaged.
14
11
8
7
9
10
Fig. E
Electronic Speed and Impact Control
(Fig. E)
D25651, D25601, D25603, D25831,
D25851
The electronic speed and impact control allows the
use of smaller drill bits without the risk of bit breakage,
hammerdrilling into light and brittle materials without
shattering and optimal tool control for precisechipping.
To set the control dial, turn the dial7 to the desired level.
The higher the number, the greater the speed and impact
energy. Dial settings make the tool extremely adaptable for
many different appli cations. The required setting depends
on the bit size and hardness of material beingdrilled.
Mode Selector (Fig. A)
NOTICE: Never change the mode while the unit is
running. Tool must come to a complete stop before
activating the mode selector button or damage to the
tool mayresult.
CAUTION: Do not change to hammerdrill mode with
chisel bit in tool holder. Personal injury and damage
to tool mayresult.
The D25501, D25553, D25601, D25603, and D25651 use
two operating modes. To select the required operating
mode, rotate the mode selector6 until the arrow points to
the hammerdrilling or the chipping icon. The D25831 and
D25851 use only the chippingmode.
Hammerdrilling Mode ( )
D25501, D25553, D25601, D25603,
D25651
The tool simultaneously rotates and impacts the
work. This mode is appropriate for all concrete and
masonryoperations.
Chipping Mode ( )
D25831, D25851
The spindle lock is engaged during chipping mode
so the tool impacts the work without rotating. This
mode is appropriate for light chipping, chiseling and
demolitionapplications.
NOTE: In chipping mode, the hammerdrill can also be used
as a lever to free a jammed drillbit.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DeWalt D25553 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DeWalt D25553 in de taal/talen: Engels, Frans, Spaans, Alle talen als bijlage per email.

De handleiding is 2,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info