460547
23
Verklein
Vergroot
Pagina terug
1/152
Pagina verder
English | 23
Bosch Power Tools 2 609 004 157 | (11.5.10)
Selecting the Sanding Sheet
Depending on the material to be worked and the required rate of material removal, different sanding
sheets are available:
Dust/Chip Extraction
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
Use dust extraction whenever possible.
Provide for good ventilation of the work-
ing place.
It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
Connecting the Dust Extraction (see figure A)
Remove the application tool/accessory when
mounting the dust extraction 18 (accessory).
If required, assemble the parts of the dust extrac-
tion 18 as shown in the figure. Position the as-
sembled dust extraction onto the machine via the
tool holder 7. Turn the dust extraction in such a
manner that the cams of the dust extraction en-
gage into the corresponding recesses on the
housing. Fasten the dust extraction to the ma-
chine with the retaining clip 16 as shown in the
figure.
Pay attention that the felt ring 15 is undamaged
and faces tightly against the sanding plate 12.
Replace a damage felt ring immediately.
Place a vacuum hose 19 (accessory) onto the
vacuum connection 17. Connect the vacuum
hose 19 with a vacuum cleaner (accessory). An
overview for the connection of various vacuum
cleaners can be found at the end of these instruc-
tions.
The vacuum cleaner must be suitable for the ma-
terial being worked.
When vacuuming dry dust that is especially det-
rimental to health or carcinogenic, use a special
vacuum cleaner.
Sanding disc Material Application Grain size
Red quality
– All wooden materi-
als (e.g., hard-
wood, softwood,
chipboard, building
board)
– Metal materials
For coarse-sanding, e.g. of rough, un-
planed beams and boards
coarse 40
60
For face sanding and planing small
irregularities
medium 80
100
120
For finish and fine sanding of wood fine 180
240
320
400
White quality
–Paint
–Varnish
– Filling compound
– Filler
For sanding off paint coarse 40
60
For sanding primer (e.g., for removing
brush dashes, drops of paint and paint
run)
medium 80
100
120
For final sanding of primers before coat-
ing
fine 180
240
320
OBJ_BUCH-1170-002.book Page 23 Tuesday, May 11, 2010 3:36 PM
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch PMF 10,8 LI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch PMF 10,8 LI in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 10,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info