460547
24
Verklein
Vergroot
Pagina terug
1/152
Pagina verder
24 | English
2 609 004 157 | (11.5.10) Bosch Power Tools
Operation
Starting Operation
Inserting the Battery
f Use only original Bosch lithium ion batter-
ies with the voltage listed on the nameplate
of your power tool. Using other batteries can
lead to injuries and pose a fire hazard.
Note: Use of batteries not suitable for the ma-
chine can lead to malfunctions of or cause dam-
age to the power tool.
Insert the charged battery 2 into the handle until
it can be felt to engage and faces flush against
the handle.
Switching On and Off
To switch on the power tool, push the On/Off
switch 5 toward the front in the direction of the
“1” on the switch.
To switch off the power tool, push the On/Off
switch 5 toward the rear in the direction of the
“0” on the switch.
The lithium ion battery is protected against
deep discharging by the “Electronic Cell Protec-
tion (ECP)”. When the battery is empty, the ma-
chine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
Note: If the machine should automatically
switch off because of a discharged or overheat-
ed battery, make sure to set the machine’s
On/Off switch 5 to off. Charge the battery and
allow it to cool down before restarting the ma-
chine. Otherwise the battery can become dam-
aged.
Preselecting the Orbital Stroke Rate
With the thumbwheel for preselection of the or-
bital stroke rate 3, you can preselect the required
orbital stroke rate, even during operation.
The required stroke rate depends on the materi-
al and the working conditions and can be deter-
mined through practical testing.
When sawing and cutting harder materials, e.g.,
wood or metal, it is recommended to work with
orbital stroke rate “5” or “E”; for softer materi-
als, such as plastic, orbital stroke rate “4” is rec-
ommended.
When sanding harder materials, e.g., wood or
metal, it is recommended to work with orbital
stroke rate “5”; for softer materials, such as soft-
wood, orbital stroke rate “4” is recommended.
The Eco electronics are active at the maximum
orbital stroke rate “E”: When the application
tool is not subject to load, the orbital stroke rate
is automatically reduced (after approx. 1 s). The
reduction extends the battery operating dura-
tion per charge, and the reduced vibrations en-
able precise applying of the application tool on-
to the workpiece. As soon as load is applied to
the application tool again, the machine automat-
ically accelerates to the maximum orbital stroke
rate.
The Eco electronics, however, are not suitable
for sanding activities. Instead, orbital stroke
rate “5”, which has the same oscillation rate as
setting “E” yet without the Eco electronics, is
suitable for sanding.
Working Advice
Note: Do not cover off the venting slots 6 of the
machine while working, as this reduces the
working life of the machine.
While working with HCS tools make sure that
the covering of the tools is undamaged.
Operating Principle
Due to the oscillating drive the application
tool/accessory swings up to 20000 times per
minute for 2.8°. This allows for precise work in
narrow spaces.
Work with low and uniform appli-
cation pressure, otherwise, the
working performance will decline
and the application tool can be-
come blocked.
While working, move the machine
back and forth, so that the appli-
cation tool does not heat up ex-
cessively and become blocked.
OBJ_BUCH-1170-002.book Page 24 Tuesday, May 11, 2010 3:36 PM
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch PMF 10,8 LI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch PMF 10,8 LI in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 10,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info