680440
36
Verklein
Vergroot
Pagina terug
1/144
Pagina verder
5.11 DIL switch14
Impulse behaviour during the hold-open phase:
The impulse behaviour during the hold-open phase can be set
for operation with automatic timed closing.
14 ON An impulse cancels the hold-open phase.
Theoperator closes the gate after the
pre-warning phase has elapsed.
14 OFF
An impulse increases the hold-open phase by the
pre-set time.
5.12 DIL switch15
Setting the speed:
See Figure9.2 and section4.3.2
15 ON Slow mode (slow speed); (no SKS required)
15 OFF
Normal mode (normal speed)
5.13 DIL switch16
Setting the operating mode:
Press-and-hold operation can be set with DIL switch16.
Theforce limit is set to the maximum value.
16 ON Press-and-hold operation
• A permanent contact at terminals20+ 21
moves the operator in the OPEN direction
• A permanent contact at terminals20+ 23
moves the operator in the CLOSE direction
• The operator stops if the respective contact
is interrupted
16 OFF
Normal mode
NOTE:
Special functions are possible during press-and-hold
operation in conjunction with a universal adapter print UAP1.
6 Radio
CAUTION
Danger of injuries due to unintended gate travel
Unwanted gate travel may occur while teaching in the radio
system.
Pay attention that no persons or objects are in the
gate's travel range when teaching in the radio system.
• After teaching-in or extending the radio system, perform
a function check.
• Only use original components when extending the radio
system.
• Local conditions may affect the range of the radio
system. Moreover, when used at the same time,
GSM900 mobile phones can affect the range.
6.1 Hand transmitter BDS140
WARNING
Danger of injury due to unwanted
gate travel
Pressing a button on the hand
transmitter may result in unwanted gate
cycles and cause injury.
Make sure that the hand
transmitters are kept away from
children and can only be used by
people who have been instructed
on how the remote-control gate
functions!
If the gate has only one safety
feature, only operate the hand
transmitter if you are within sight of
the gate!
Only drive or pass through remote-
control gate systems when the gate
is at a standstill!
Please note that unwanted gate
cycles may occur if a hand
transmitter button is accidentally
pressed (e.g. if stored in a
pocket / handbag).
ATTENTION
Functional disturbances caused by environmental
conditions
These conditions can impair function!
Protect the hand transmitter from the following conditions:
• Direct sunlight (perm. ambient temperature:
20°C to + 60°C)
• Moisture
• Dust
6.1.1 Description of the hand transmitter BDS140
See Figure10
1 LED
2 Hand transmitter buttons
3 Battery compartment cover
4 Battery
6.1.2 Inserting / changing the battery
See Figure10
Use only the battery type AAA (LR03) 1,5 V.
6.1.3 Excerpt from the declaration of conformity
Conformity of the abovementioned product with the
requirements of the directives according to article3 of the
R&TTE directives 1999 / 5 / EC was verified by compliance
with the following standards:
• EN 300 220-1
• EN 300 220-3
• EN 301 489-1
• EN 300 489-3
The original declaration of conformity can be requested from
the manufacturer.
36
C300 - C800 / Rev. 1.1 RE / 07.2014
ENGLISH
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Berner C500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Berner C500 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 12,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info